User ManualES70/ES71Thank you for buying a Samsung Camera. This manual will help you learn to capture images, share or print your photos, and edit photos with the accompanying software. Please read this manual thoroughly.
001Thank you for buying a Samsung Digital Camera.å Prior to using this camera, please read the user manual thoroughly. å If you require After Sales service, please bring the camera and the cause of the camera malfunction (such as battery, Memory card etc.) to the A/S center. å Please check that the camera is operating properly prior to when you intend to use it (e.g. for a trip or an important event) to avoid disappointment. Samsung takes no responsibility for any loss or damage that may result from camera malfunction. å Keep this manual in a safe place. å If you use a card reader to copy the images on the memory card to your PC, the images could be damaged. When transferring the images taken with the camera to your PC, be sure to use the supplied USB cable to connect the camera to your PC. Please note that the manufacturer holds no responsibility for loss or damage of images on the memory card due to the use of a card reader.å The contents and illustrations of this manual are subject to change without prior notice for upgrading the camera functions.Ä Microsoft, Windows and Windows logo are registered trademarks of Microsoft Corporation incorporated in the United States and/or other countries. Ä Adobe and Reader are either trademarks or registered trademarks in the United States and/or other countries.Ä All brand and product names appearing in this manual are registered trademarks of their respective companies.Ä For Open Source License information, refer to the "OpenSourceInfo.pdf" in the provided CD-ROM.Getting to Know your cameraInstructionsSetting up the applica-tion softwareUse this camera in the following order.To use this camera with a PC, install the application software rst. After this has been done, the stored images in the camera can be moved to the PC and can be edited by an image editing program. (p.89)Take a picture. (p.21)Insert the supplied USB cable into the PC’s USB port and the camera’s USB connection terminal. (p.89)Check the camera’s power. If the power is turned off, preset the camera button to turn it on.Open Windows’s EXPLORER and search for [Removable Disk]. (p.90)Take a pictureInsert the USB cableCheck the camera's powerCheck [Removable Disk]
002WarningWARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.å Do not use the ash in close proximity to people or animals. Positioning the ash too close to your subject’s eyes may cause eyesight damage.å For safety reasons keep this product and accessories out of reach of children or animals to prevent accidents e.g.:- Swallowing battery or small camera accessories. If an accident should occur, please consult a doctor immediately.- There is the possibility of injury from the camera’s moving parts.å Battery and camera may become hot during prolonged use and it may result in camera malfunction. Should this be the case, allow the camera to sit idle for a few minutes to allow it time to cool.å Do not leave this camera in places subject to extremely high tem-peratures, such as a sealed vehicle, direct sunlight or other places of extremes in temperature. Exposure to extreme temperatures may adversely affect the camera’s internal components and could cause a re.å When in use, do not cover the camera or Charger. This may cause heat to build up and distort the camera body or cause a re. Always use the camera and its accessories in a well-ventilated area.DangerDANGER indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.å Do not attempt to modify this camera in any way. To do so may result in re, injury, electric shock or severe damage to you or your camera. internal inspection, maintenance and repairs should only be carried out by your dealer or Samsung Camera Service center.å Please do not use this product in close proximity to ammable or explosive gases, as this could increase the risk of explosion.å Should any form of liquid or a foreign object enter the camera, do not use it. Switch off the camera, and then disconnect the power source. You must contact your dealer or Samsung Camera Service center. Do not continue to use the camera as this may cause a re or electric shock.å Do not insert or drop metallic or inammable foreign objects into the camera through access points e.g. the memory card slot and battery chamber. This may cause a re or electric shock.å Do not operate this camera with wet hands. This could pose a risk of electric shock.
003CautionCAUTION indicates a potentially hazardous situation which, if not avoided, may result in a minor or moderate injury. å Leaking, overheating, or damaged battery could result in re or injury. - Use battery with the correct specication for the camera. - Do not short circuit, heat or dispose of battery in re. - Do not insert the battery with the polarities reversed.å Remove the battery when not planning to use the camera for a long period of time. Otherwise the battery may leak corrosive electrolyte and permanently damage the camera’s components.å Do not re the ash while it is in contact with hands or objects. Do not touch the ash after using it continuously. It may cause burns.å Do not move the camera while it is switched on, if you are using the AC adapter. After use, always switch off the camera before unplugging the cable from the wall socket. Then make sure that any connector cords or cables to other devices are disconnected before moving the camera. Failure to do so may damage the cords or cables and cause a re or electric shock.å Take care not to touch the lens or lens cover to avoid taking an unclear image and possibly causing camera malfunction.å Avoid obstructing the lens or the ash when you capture an image.å When using this camera in low temperatures, you may experience the following. These are not camera malfunctions and usually recover at normal temperature. - It takes longer to turn on the LCD monitor and the color may differ from the subject. - When changing the composition, there may be an after image on the LCD monitor.å Credit cards may be demagnetized if left near case. Avoid leaving magnetic strip cards near the case.å Never connect the 20 pin connector to the USB port of a PC. This carries a high risk of computer malfunction.ContentsREADYRECORDING007 System chart007 Package Contents007 Sold Separately008 Identification of features008 Front & Top009 Back010 Bottom010 5 Function button011 Self-timer lamp011 Camera Status Lamp011 Mode icon012 Connecting to a Power Source015 Inserting the memory card015 Using the Anti-scratch Mask016 Instructions on how to use the memory card018 When using the camera for the first time019 LCD monitor indicator020 How to use the menu021 Starting the recording mode021 Selecting modes021 How to use the Smart Auto mode023 How to use the Program mode 023 How to use the DIS mode 024 Using the Photo Help Guide mode 025 How to use the Scene modes 026 How to use the Movie mode
004SETUPContents027 Recording the movie clip without sound027 Pausing while recording a movie clip (Successive Recording)028 Things to Watch Out for When Taking Pictures029 Using the camera buttons to set the camera029 POWER button029 SHUTTER button029 ZOOM button031 Info (DISP) /Up button031 Macro /Down button033 Focus lock033 Flash /Left button035 Self-timer /Right button037 MENU button037 OK button037 Shooting038 How to Enable Functions Using the MENU Button038 Photo Size /Movie Size039 Quality /Frame rate039 Exposure compensation040 ISO040 White balance 041 Face Detection043 Face Tone043 Face Retouch044 Auto Focus type044 Metering045 Photo Style Selector 046 Image Adjust047 ACB047 Drive mode048 Voice Memo048 Voice Recording049 Recording the movie clip without voice050 Sound 050 Volume050 Start up sound050 Shutter sound 050 Beep sound 051 AF sound 051 Display 051 Language 051 Function Description052 Start up image052 Display Brightness052 Quick View052 Display Save053 Settings053 Formatting a memory053 Initialization054 Setting up the Date /Time /Date type
005PLAYContents054 Time Zone054 File name055 Imprinting the recording date055 Auto power off056 Auto Focus lamp056 Selecting Video out type057 Setting the USB058 Starting play mode058 Playing back a still image058 Playing back a movie clip 059 Movie clip capture function059 Playing back a recorded voice059 Playing back a voice memo060 LCD monitor Indicator061 Using the camera buttons to set the camera061 Thumbnail /Enlargement button 061 Smart Album063 Info (DISP) /Up button063 Play & Pause /OK button064 Left /Right /Down /MENU button064 Delete button065 Setting up the play back function using the LCD monitor067 Edit 067 Resize068 Rotating an image068 Photo Style Selector 069 Image Adjust071 Starting the Multi Slide Show 071 Start the Multi Slide Show071 Selecting Images072 Congure Multi Slide show effects072 Setting play interval 072 Setting Background Music073 File Options073 Deleting images073 Protecting images074 Voice memo075 DPOF077 Copy to Card078 PictBridge079 PictBridge : Picture Selection079 PictBridge : Print Setting080 PictBridge : Reset080 Important notes082 Warning indicator083 Before contacting a service center085 Specifications
006SOFTWAREContents088 Transferring files to your computer (for Windows)088 For Windows users092 Transferring files to your computer (for Mac)092 For Mac users094 FAQ
007System chartPackage ContentsCamera Rechargeable battery AC adapter / USB cableCamera strapSoftware CD(User manual included)Quick Start Manual Anti-scratch MaskSold SeparatelySD/SDHC memory card(see p.17)Camera case AV cable Battery chargerPlease check that you have the correct contents before using this product. The contents can vary depending on the sales region. To buy theoptional equipment, contact your nearest Samsung dealer or Samsung service center. Parts and accessories illustrated below may differ fromexact appearance.
008Identication of featuresFront & TopFlashLens /Lens coverAF sensor / Self-timer lamp Shutter buttonPOWER buttonMicrophoneSpeaker
009BackIdentification of featuresCamera status lampLCD monitorPlay mode buttonFn /Delete button5 function buttonMENU buttonUSB /AV /DC terminalZoom Tele(T) button /Digital zoomZoom Wide(W) button /ThumbnailStrap eyeletMODE button
010BottomIdentification of features5 Function buttonBattery holderBattery chamber coverBattery chamberMemory card slotTripod socketInformation /Up buttonMacro /Down buttonSelf-timer / Right buttonFlash /Left buttonOK /Play & Pause button
011Self-timer lampIcon Status DescriptionBlinking- For the rst 8 seconds, the lamp blinks at 1 second intervals.- For the nal 2 seconds, the lamp blinks quickly at 0.25-second intervals.BlinkingFor the 2 seconds, the lamp blinks quickly at 0.25-second intervals.BlinkingA picture will be taken after about 10 seconds and 2 seconds later a second picture will be taken.BlinkingAfter pressing the Shutter button, the image is taken in accordance with the subject’s movement.Camera Status LampStatus DescriptionPower onThe lamp turns on and off when the camera is ready to take a pictureAfter taking a pictureThe lamp blinks while saving the image data and turns off when the camera is ready to take a pictureWhen ash battery is chargingThe lamp blinksWhen the USB cable is inserted to a PCThe lamp lights up (LCD monitor turns off after initializing the device)Transmitting Data with a PCThe lamp blinks (LCD monitor turns off)When the USB cable is inserted into a printerThe lamp is offWhen the printer is printingThe lamp blinksWhen the AF activatesThe lamp turns on (The camera focus on the subject)The lamp blinks (The camera doesn’t focus on the subject)Identification of featuresMode iconRefer to p.21 for more information about the camera mode setting.MODESmart AutoProgram DISPhoto Help GuideICONMODE Scene MovieICONMODESCENEBeauty ShotFrame GuideNight PortraitICONMODE Children Landscape Close up TextICONMODE Sunset Dawn Backlight FireworksICONMODEBeach&SnowICON
012Connecting to a Power SourceÊ BP70A rechargeable battery SpecicationModel BP70AType Lithium lonCapacity 740mAhVoltage 3.7VCharging timeApproximately 150 MinutesYou should use the rechargeable battery BP70A supplied with the camera. Be sure to charge the battery before using the camera.Ê Number of images and battery life: Using the BP70ABattery life / Number of imagesConditionsStill imageApprox. 125 MIN /Approx. 250 shotsUsing the fully charged battery, Default settings, Program mode, Shot to shot interval: 30Sec.Changing the zoom position betweenthe Wide and the Tele after every shot.Using the ash on every second shot.Using the camera for 5 minutes andthen powering it off for 1 minute.Movie Approx. 110 MINUsing the fully charged battery640x480 image size30fps frame rateÄ These gures are measured under Samsung’s standard conditions and shooting conditions and may vary depending on the user’s methods.Important information about battery usage.å When camera is not in use, turn off the power.å Please remove the battery if the camera will not be used for long periods. Batteries can lose power over time and are prone to leaking if kept inside the camera.å Low temperatures (below 0°C) can affect the performance of the battery and you may experience reduced battery life.å Batteries will usually recover at normal temperatures.å During extended use of the camera, the camera body may become warm. This is perfectly normal.Ê Connecting the AC adapter with the USB cable can be used as an AC cable, and you can charge the rechargeable battery with the AC cable.- Using an AC cable : Connect the AC adapter to the USB cable. It can be used as a power cable.- Using a USB cable : Remove the AC adapter. You can download stored images to your PC (p.89) or supply the power to your camera through the USB cable.
013Connecting to a Power SourceImportant information about USB cable usage.å Use a USB cable with the correct specication.å If the camera is connected to the PC through a USB hub : connect the camera directly to the PC.åIf the camera and other devices are connected to the PC at the same time : remove other device.åCamera can not be detected using the front side USB port of computer. In this case, use the back side USB port of computer.åIf the USB port of the PC doesn’t meet the Power output standard (5V, 500mA), the battery may not be charged.Ê How to charge the rechargeable batteryåBefore inserting any cables or AC adapter, check the directions and do not insert by force. It may cause breakage of cable or camera.å If the charging LED of the AC Charger does not turn on or blink after inserting the rechargeable battery, please check whether the battery is inserted correctly.åIf you charge the battery with the camera power on, the battery won’t be fully charged. Turn the camera off while charging the battery.Ê Charging LED of the AC chargerCharging LEDBeing Charged Red LED is onCharging is complete Green LED is onCharging error Orange LED is off or blinkingå If you insert the fully discharged battery to charge it, do not turn on the camera at the same time. The camera may not be turned on because of the low battery capacity. Charge the battery for more than 10 minutes before using the camera.å Do not use the ash frequently or take a movie clip with the fully discharged battery charged for a short time. Even if the charger is inserted, the camera power may be turned off because the rechargeable battery is discharged again.
014Connecting to a Power SourceWhen using the battery, please keep the following guidelines. Failure to do so may cause the generation of heat, re, or explosionå If you nd the battery shape distorted in size, try to contact a service center. It may present physical dangers.å Use only the recommended battery charger.å Do not place the product close to the re device.å Do not insert the product into the microwave oven.å Do not place the product inside a car during the summer.å Do not place the product in a space with hot temperature and high humidity range.å Do not use the product for long time in the carpet, comforter, or electronic mattress.å Do not leave the product turned on where the air cannot be circulated.å Be careful about the battery slot not to be connected with accessories like necklace, coin, key, watch, and so on.å Use only authentic, manufacturer-recommended, Lithiumion replacement batteries.å Do not try to disassemble or perforate the product by using the sharp pin.å Do not give a hard pressure on the product.å Do not let the product fall down from the height, or do not give a shock to the product.å Do not exposure the product to the high temperature over 60℃(140℉) degree.å Do not exposure the product to the water or humidity.Guidelines of disposal å Do not throw away the over used battery.å Destruction by re is not allowed for disposal of battery.å The disposal instruction may differ depending on the nation or the specic region. Please follow the given method of disposal.Guideline of recharging the batteryå Do not recharge the battery by using the different method other than the user manual indicates. Failure to following the right instruction may cause the re or the explosion.
015Connecting to a Power SourceÊ There are 4 indicators for battery condition that are displayed on the LCD monitor.Battery indicatorBattery statusThe battery is fully chargedLow battery capacity (Prepare to recharge or use spare battery)Low battery capacity (Prepare to recharge or use spare battery)Battery empty (Recharge or use spare battery)Ä When using the camera and the battery in a place that is excessively cold or hot, the battery status on the LCD may be different from the actual battery status.Ê Insert the battery as shown- If the camera does not turn on after you have inserted battery, please check whether the battery (+ /-) direction is right.- When the battery chamber cover is opened, do not force the battery chamber cover, this may damage it.Inserting the memory cardÊ Insert the memory card as shown.- Turn off the camera’s power before inserting the memory card.- Have the front label of the memory card facing toward the front of the camera (Lens) and the card pins toward the back of the camera (LCD monitor).- Do not insert the memory card the wrong way round. Doing so may damage the memory card slot.Using the Anti-scratch MaskÊ Insert the anti-scratch mask as shown.- Using the anti-scratch mask can protect the camera from accidental scratches. Make sure two points of holes in the camera body are connected to the anti-scratch mask.
016Instructions on how to use the memory cardå If the memory card is subjected to any of the following, the recorded data may become corrupted : - When the memory card is used incorrectly. - If the power is switched off or the memory card is removed while recording, deleting (formatting) or reading.å Samsung cannot be held responsible for lost data.å It is advisable to copy important data onto other media as back-up e.g. hard disks, CD etc.å If there is insufcient memory available : A [Memory Full] message will appear and the camera will not operate. To optimize the amount of memory in the camera, replace the memory card or delete unnecessary images stored on the memory card.å Don't remove the memory card when the camera status lamp is blinking as this may cause damage to data on the memory card.å Be sure to format the memory card (see p.53) if you are using a newly purchased memory card for the rst time, if it contains data that the camera cannot recognize, or if it contains images captured with a different camera.å Turn off the camera power whenever the memory card is being inserted or removed.å Repeated use of the memory card will eventually reduce the memory card’s performance. Should this be the case, you will need to purchase a new memory card. Wear and tear on the memory card is not covered by the Samsung warranty.å The memory card is an electronic precision device. Do not bend, drop or subject the memory card to any heavy impact.å Do not store the memory card in an environment with strong electronic or magnetic elds, e.g. near loud speakers or TV receivers.å Please do not use or store in an environment where there are extremes in temperature.å Do not allow the memory card to become dirty or to come into contact with any liquid. Should this happen, clean the memory card with a soft cloth.å Please keep the memory card in its case when not in use.å During and after periods of extended use, you may notice that the memory card is warm. This is perfectly normal.å Do not use a memory card that is used in another digital camera. To use the memory card in this camera, format the memory card using this camera. å Do not use a memory card formatted by another digital camera or memory card reader.
017Instructions on how to use the memory cardThe camera can use SD/SDHC Memory Cards. å The SD/SDHC memory card has a write protect switch that prevents image les from being deleted or formatted. By sliding the switch to the bottom of the SD/SDHC memory card, the data will be protected. By sliding the switch to the top of the SD/SDHC memory card, the data protection will be cancelled.å Slide the switch to the top of the SD/SDHC memory card before taking a picture.When using a 1GB SD memory, the specied shooting capacity will be as follows. These gures are approximate as image capacities can be affected by variables such as subject matter and memory card type.Recorded image sizeSuper FineFineNormal30 FPS 15 FPSStill imageAbout 147 About 284 About 403 - -About 167 About 309 About 441 - -About 202 About 367 About 528 - -About 211 About 374 About 537 - -About 339 About 566 About 792 - -About 532 About 802 About 1065 - -About 870 About 1144 About 1437 - -About 1471 About 1670 About 1872*Movie clip- - -About 9'54"About 18'58"- - -About 26'24" About 49'23"å The zoom button doesn’t function during the movie recording.å The recording times can be changed by the zoom operation.å You can record videos of up to 4GB or 2hours each.Card pinsWrite protect switchLabel[SD (Secure Digital) memory card]
018Ê Setting up the date, time and date type1. Select the [Date&Time] menu by pressing the Up/Down button and press the Right button.2. Select the desired sub menu by pressing the Up/Down/Left/Right button and press the OK button.Left/Right button : Selects world time/year/month/day/hour/minute/date type.Up/Down button : Changes the value of each item.When using the camera for the rst timeÊ Charge the rechargeable battery fully before using the camera for the rst time.Ê When the camera is turned on for the rst time, a menu will be displayed on the LCD monitor to set date, time, time zone and language. This menu will not be displayed again after setting up the date, time, time zone and language. Set up the date, time, time zone and language before using this camera.Ê Setting up the language1. Select the [Language] menu by pressing the Up/Down button and press the Right button.2. Select the desired sub menu by pressing the Up/Down button and press the OK button.Ê Setting up the Time Zone1. Select the [Time Zone] menu by pressing the Up/Down button and press the Right button.2. Press the Left/Right button to select the desired mode.Ä For more information about the World Time, refer to the p.54.Back DSTLondon[GMT +00:00] 2010/01/01 12:00 PMTime ZoneBack SetDate & Time :LondonLanguage :EnglishTime Zone :08/12/01English한국어FrançaisDeutschEspañolItalianoBack SetDate & Time :10/01/01Language :EnglishTime Zone :London2010 /01 /01 12:00 Offyyyy mm dd
019Ê The LCD monitor displays information about the shooting functions and selections.LCD monitor indicatorNo. Description Icons Page1 Recording mode p.212 Voice Memo p.483Number of available shots remaining00001 p.17Remaining time 00:00:00 p.174Memory card icon / Internal memory icon-[Image & Full Status]No. Description Icons Page5 Battery p.156Optical /Digital Zoom bar /Digital Zoom ratep.297 Photo Size /Movie Size p.388Image Quality / Frame Ratep.399 Metering p.4410 Flash p.3311Self-timer /Drive modep.36/4712Macro p.3113Face Detection · Self-Portrait· Smile Shot · Blink Detectionp.4114 Date /Time 2010/01/01 12:00 PM p.5415 Camera shake Warning p.2816Auto Focus Framep.4417 Image adjust p.4618 Photo Style Selector p.4519ISO /Face Retouch /Without voicep.40/43 4920White Balance /Face Tonep.40/4321Exposure compensationp.3922Aperture Value /Shutter Speed-
020How to use the menu1. Turn on the camera and press the MENU button. A menu for each camera mode appears.2. Use the up or down button to navigate through the menus.3. Use the left or right button to select a sub menu.4. Select a submenu and click the OK button to save settings and return to the previous window.Press the Left or Right button.Press the Left or Right button.Press the Up or Down button.Press the Up or Down button.Back SetStart Sound :OffShutter Sound :1Beep Sound :1AF Sound :OnVolume :MediumOffLowMediumHighStart Sound :OffShutter Sound :1Beep Sound :1AF Sound :OnVolume :MediumExit BackShootingSoundDisplaySettingsStart SoundShutter SoundBeep SoundAF SoundVolumeExit ChangeShootingSoundDisplaySettingsFunction DescriptionStart ImageDisplay BrightnessQuick ViewPower SaveLanguageExit ChangeShootingSoundDisplaySettingsStart SoundShutter SoundBeep SoundAF SoundVolumeExit ChangeShootingSoundDisplaySettingsQualityEVISOWhite BalanceFace DetectionPhoto SizeExit ChangeFocus AreaShootingSoundDisplaySettingsQualityEVISOWhite BalanceFace DetectionPhoto SizeExit ChangeFocus Area
021Starting the recording modeSelecting modesYou can select the shooting modes by using the MODE button on the back of your camera.Ê How to use the MODE button1. Press the MODE button and a menu will be displayed.2. Select a desired mode by pressing the Up /Down button and then press the OK button.The camera automatically chooses the appropriate camera settings based on a detected type of scene. It will be helpful if you are not familiar with the camera settings for various scenes.1. Insert the battery (p.15). Insert the battery taking note of the polarity (+ /-).2. Insert the memory card (p.15). As this camera has a 9.9MB internal memory, you do not need to insert the memory card. If the memory card is not inserted, an image will be stored on the internal memory. If the memory card is inserted, an image will be stored on the memory card.3. Close the battery chamber cover.4. Press the POWER button to turn on the camera.5. Select Smart Auto mode by using the MODE button. 6. Point the camera towards the subject and compose the image by using the LCD monitor.7. Press the Shutter button to capture an image.How to use the Smart Auto mode( )Smart AutoProgramDISPhoto Help GuideSceneThis mode allows you to directly set various features for shooting.
022Starting the recording modeÊ Each scene is recognized in the following conditions; [Landscape] ( ) : When shooting outdoor scenes [White] ( ) : When shooting a white background [Night] ( ) : When shooting the nighttime scenes [Night Portrait] ( ) : When shooting people in a dark outdoor place [Backlight] ( ) : When shooting a backlit scenery without a portrait [Backlight Portrait] ( ) : When shooting a backlit portrait [Portrait] ( ) : When shooting a portrait [Macro] ( ) : When shooting close-ups [Macro Text] ( ) : When shooting texts in a close focus [Tripod] ( ) : When shooting a subject that doesn’t move for a certain time after the camera is mounted on the tripod (available only when the camera recognizes it as nighttime) [Action] ( ) : When shooting a subject making frequent movements [Macro Portrait] ( ) : When shooting close-up portrait shot [Blue Sky] ( ) : When shooting blue sky [Sunset Sky] ( ) : When shooting sunset [Macro Color] ( ) : When shooting close-up shot for the subject with various colors [Natural Green] ( ) : When shooting nature such as forest and leaveså If the camera does not recognize a proper scene mode, the default settings will be used.å Even if there is a face detected, the camera may not select a portrait mode depending on the subject’s position or lighting.å The camera may not select the correct scene depending on shooting environments, such as camera shake, lighting, and distance to the subject.å The [Night] mode recognizes scenes only when the ash is set to off. The camera operates the [Tripod] mode after checking the shooting condition on the tripod for a certain time. å Despite using a tripod, the camera may not select a tripod mode depending on the subject’s movement.
023Starting the recording modeDigital Image Stabilization (DIS) mode.This mode will reduce the effect of camera shake and help you get a well-exposed image in dim conditions.1. Select the DIS mode by using the MODE button. (p.21)2. Point the camera towards the subject and compose the image by using the LCD monitor.3. Press the Shutter button to capture an image.How to use the DIS mode ( )Ê Things to watch out for using the DIS mode1. The digital zoom will not operate in the DIS mode.2. If the lighting condition is brighter than uorescent lighting conditions, the DIS will not activate.3. If the lighting condition is darker than uorescent lighting conditions, camera shake warning indicator ( \\ ) will display. For best results only take pictures in situations where the camera shake warning indicator ( \\ ) is not displayed.4. If the subject is moving, the captured image may be blurred.5. As the DIS uses the camera's digital signal processor, it may take a little longer for the camera to process and save the images.Selecting the automatic mode will congure the camera with optimal settings. You can still manually congure all functions except the aperture value and shutter speed. 1. Select the Program mode by using the MODE button. (p.21)2. Press the MENU button to congure advanced functions.How to use the Program mode ( )
024Starting the recording modeUsing the Photo Help Guide mode ( ) Helps the user learn the correct picture taking method and includes solutions for potential problems that may occur. This also enables the user to practice the best way to take the pictures.Available functions of the photo help guideå Functions that can be used when focusing is difcultå Functions that can be used when the image is blurredå Functions that can be used when lming in the darkå Functions that can be used when adjusting the picture brightness å Functions that can be used when adjusting the picture color [Function that can be used when focusing is difcult]Pressing the Left/Right button Pressing the OK buttonPressing the Up/Down buttonPressing the Up buttonPressing the OK buttonPressing the shutter buttonPressing the Left/Right button Pressing the OK buttonPress the shutter button to practice using this feature.Guide list Photo Help GuideFeatures to reduce camera shakeFeatures to use when adjusting brightnessFeatures to use when the image is out of focusFeatures to use in low light conditionsFeatures to use when adjusting colorsPhoto Help GuideWhen the subject is in focus, press the shutter button completely to capture the image or video. If the subject is out of focus, try half-pressing the shutter button again.2/2Back PracticePhoto Help GuideTo focus on your subject, half-press the shutter button:- Green frame: subject is in focus- Red frame: subject is out of focus1/2Back PracticePhoto Help GuideGuide list Features to use when the image is out of focusTo focus on a subject 80 cm away or moreTo focus on people’s facesHalf-press the shutter button to focusTo focus on a subject less than 80 cm awayPhoto Help GuideBack ChangeChange
025 The scene modes are listed below. [Beauty Shot] ( ) : Take a photo of portraits by setting options to clear facial imperfections. [Frame Guide] ( ) : Use this mode when you want someone else to take a picture for you from the angle you choose. [Night] ( ) : Use this for shooting still images at night or in other dark conditions. [Portrait] ( ) : To take a picture of a person. [Children] ( ) : To take a picture of fast moving objects, for example, children. [Landscape] ( ) : To take pictures of distant scenery. [Close Up] ( ) : Close-up shooting for small objects such as plants and insects. [Text] ( ) : Use this mode to shoot a document. [Sunset] ( ) : For taking pictures of sunsets. [Dawn] ( ) : Daybreak scenes. [Backlight] ( ) : Portrait without shadows caused by backlight. [Fireworks] ( ) : Firework scenes. [Beach&Snow] ( ) : For ocean, lake, beach and snowscape scenes.Use the menu to easily congure optimal settings for a variety of shooting situations.1. Select the Scene mode by using the MODE button. (p.21)2. Press the Right button, then press the Up/Down button to select the desired mode.3. Point the camera towards the subject and compose the image by using the LCD monitor.4. Press the shutter button to capture an image.How to use the Scene modes ( )Starting the recording modeSmart AutoProgramDISPhoto Help GuideSceneFrame GuideNightPortraitChildrenLandscapeBeauty ShotClose UpThis mode allows you to choose an appropriate scene for a variety of situations.
026Starting the recording modeHow to use the Movie mode ( )A movie clip can be recorded for as long as the available recording time of the memory capacity allows. (Max.2 hours) 1. Select the Movie mode by using the MODE button. (p.21)2. Point the camera towards the subject and compose the image by using the LCD monitor.3. Press the shutter button once and movie clips are recorded for as long as the available recording time (Max.2 hours) allows. Movie clips will still be recorded if the shutter button is released. If you wish to stop recording, press the shutter button again. Ä Movie clip size and type are listed below. - Movie clip size : 640x480, 320x240 (Selectable) - Movie clip le type : AVI (MJPEG) - Frame Rate : 30 FPS, 15 FPS (Selectable)Ê How to use the [Frame Guide] modeSet [Frame Guide] mode when you want someone else to take a picture for you from the angle you choose.1. Take a picture from the angle you choose.- A guide appears around the sides of the picture.2. Then another person can take the picture by aligning the edge of the picture to be taken with the guide framing the sides of the window. GuideCancel Frame: OKCancel Frame: OKFrame Guide: Shutter
027Starting the recording modeÊ Using Successive Recording Steps from 1-2 are the same as those for Movie mode.3. Press the shutter button and movie clips are recorded for as long as the available recording time. (Max.2 hours) Movie clips will still be recorded if the shutter button is released.4. Press the OK button to pause recording.5. Press the OK button again to resume the recording.6. If you wish to stop recording, press the shutter button again.This camera allows you to temporarily stop during unwanted scenes, while recording a movie clip. Using this function, you can record your favorite scenes into a movie clip without having to create multiple movie clips.Pausing while recording a movie clip (Successive Recording)You can record the movie clip without sound.Steps from 1-3 are the same as those for Movie mode.4. Press the MENU button.5. Press the Up /Down button to select the [Movie] menu and press the Right button.6. Select the [Voice] menu by pressing the Up /Down button and press the OK button.7. Select the [Off] menu by pressing the Left /Right button.8. Press the OK button. You can record a movie without sound.Ä See p.49 for further details.Recording the movie clip without soundStop Pause
028å The available memory capacity may vary depending on shooting conditions and camera settings.å When the Flash Off, Slow synchro mode or DIS mode is selected in a low lighting condition, the camera shake warning indicator ( \\ ) may appear on the LCD monitor. In this case, use a tripod, support the camera on a solid surface or change to ash shot mode.å Shooting against the light : It is best to take pictures with the sun in the background. Taking pictures against the sun may make the picture come out dark. To take a picture against the light, please use the [Backlight] in scene shooting mode (p.25), ll-in ash (p.33), spot metering (p.44), exposure compensation (p.39) or ACB (p.47) function.å Avoid obstructing the lens or the ash when you capture an image.Things to Watch Out for When Taking Pictureså Pressing the shutter button down half way. Lightly press the shutter button to conrm focus and ash battery charge. Press the shutter button all way down to take the picture.å Compose the image by using the LCD monitor.å Under certain conditions the auto focus system may not perform as expected. - When photographing a subject that has little contrast. - If the subject is highly reective or shiny. - If the subject is moving at high speed. - When there is strong reected light, or when the background is very bright. - When the subject matter has only horizontal lines or the subject is very narrow (such as a stick or agpole). - When the surroundings are dark.[Lightly press the shutter button][Press the shutter button]
029Using the camera buttons to set the cameraZOOM buttonThe recording mode function can be set up by using the camera buttons.Used for turning the camera’s power on /off. If there is no operation during the specied time, the camera's power will be turned off automatically to save battery life. Refer to p.55 for more information about the auto power off function.Used for taking an image or recording a movie clip in the Recording mode.å In Movie modePressing the shutter button down fully starts the process for recording a movie clip. Press the shutter button once and the movie clip is recorded for as long as the available recording time on the memory allows. If you wish to stop recording, press the shutter button again.å In Still image modePressing the shutter button down halfway activates the autofocus and checks the condition of the ash. Pressing the shutter button down fully takes and stores the image. If you select voice memo recording, the recording will start after the camera has nished storing the image data.If the menu is not displayed, this button works as the OPTICAL ZOOM or DIGITAL ZOOM button.This camera has a 5X optical zoom and a 3X digital zoom function. Using both will offer a total zoom ratio of 15X.Ê TELE Zoom Optical zoom TELE : Pressing the ZOOM T button. This will zoom into the subject i.e. the subject will appear nearer. Digital zoom TELE : When the maximum (5X) optical zoom is selected, pressing the ZOOM T button activates the digital zoom software. Releasing ZOOM T button stops the digital zooming at the required setting. Once the maximum digital zoom (3X) is achieved, pressing the ZOOM T button will have no effect.POWER buttonSHUTTER button[WIDE zoom][TELE zoom] [Digital zoom 3.0X]Pressing the ZOOM T buttonPressing the ZOOM T button
030ZOOM buttonÊ WIDE Zoom Optical zoom WIDE : Pressing the ZOOM W button. This will zoom out from the subject i.e. the subject will appear further away. Pressing the ZOOM W button continuously will set the camera to its minimum zoom setting i.e. the subject appears at its furthest from the camera. Digital zoom WIDE : When the digital zoom is in operation, pressing the ZOOM W button will reduce the digital zooming in steps. Releasing ZOOM W button stops digital zooming. Pressing the ZOOM W button will reduce the digital zoom and then it will continue to reduce the optical zoom until the mini-mum setting is reached. å Images taken using the digital zoom may take a little longer for the camera to process. Allow time for this to take place.å If the ZOOM buttons are being pressed during the Movie shots, the voice will not be recorded.å You may notice a decrease in image quality when using the digital zoom.å To view a clearer digital zoom image, press the shutter button halfway at the maximum optical zoom position and press the ZOOM T button again.å The digital zoom can’t be activated in some Scene modes ([Beauty Shot], [Night], [Portrait], [Children], [Close up], [Text], [Fireworks]), DIS mode, Movie mode, [Self-Portrait], [Smile Shot], [Blink Detection] and [Face Detection].å Take care not to touch the lens to avoid taking an unclear image and possibly causing camera malfunction. If the image is dim, turn the camera power off and on again to modify the lens position.å Take care not to press the lens as this may cause a camera malfunction.å When the camera is turned on, take care not to touch the camera’s moving lens parts as this may cause the resulting image to be dim and unclear.å Take care not to touch the lens when operating the zoom button.Digital zoomOptical zoom[TELE zoom] [Optical zoom 2X] [WIDE zoom][Digital zoom 3.0X] [TELE zoom] [WIDE zoom]Pressing the ZOOM W buttonPressing the ZOOM W buttonPressing the ZOOM W buttonPressing the ZOOM W button
031Macro ( ) /Down buttonWhile the menu is showing, the Down button operates as a direction button. When the menu is not showing, you can use the Macro ( ) /Down button to take macro pictures. The focus ranges are shown on the next page. Press the Macro button until the desired macro mode indicator appears on the LCD monitor.[Auto Focus][Macro ( )]Info (DISP) /Up buttonWhile the menu is showing, the Up button operates as a direction button. In the recording modes or playback mode, pressing this button will display the image information.[Information screen][Filming screen][Auto Macro ( )]Show all photographic information.Show only basic information.
032Mode Program ( )Focus Type Macro ( ) NormalFocus rangeW : 5 ~ 80T : 100 ~ 150W : 80 ~ InnityT : 100 ~ InnityMode DIS Mode ( ) Focus Type Auto macro ( ) NormalFocus rangeW : 5 ~ InnityT : 100 ~ InnityW : 80 ~ InnityT : 100 ~ InnityÊ Types of focus mode and focus range (W : Wide, T : Tele)(Unit: cm)å When the macro mode is selected, be particularly careful to avoid camera shake.å When you take a picture within 40cm (Wide zoom) or 100cm (Tele zoom) in the Macro mode, select the Flash off mode.Macro ( ) /Down buttonÊ Available focusing method, by recording mode( o : Selectable, ä : Innity focus range)Mode Auto macro Macro Normalo oo oo oo oModeSCENEAuto macro Macro Normaloooooooooooäo
033Focus lockTo focus on a subject not positioned in the center of the picture, use the focus lock function.3. Recompose the picture and fully depress the shutter button.1. The image to be captured.2. Press the shutter button halfway and focus on the subject.Ê Using the Focus Lock 1. Ensure the subject is in the center of the autofocus frame. 2. Press the shutter button halfway. When the green auto focus frame lights up, it means the camera is focused on the subject. Be careful not to press the shutter button all the way down to avoid taking an unwanted picture. 3. With the shutter button still pressed down only halfway, move the camera to recompose your picture as desired, and then press the shutter button completely to take the picture. If you release your nger from the shutter button, the focus lock function will be cancelled.Flash ( ) /Left buttonWhen the menu is displayed on the LCD monitor, pressing the Left button makes the cursor shift to the left tab.When the menu is not displayed on the LCD monitor, the Left button operates as the Flash ( ) button.Ê Selecting the ash mode 1. Select a desired Recording mode, except the [Movie] mode and the [DIS] mode. (p.21) 2. Press the Flash button until the desired ash mode indicator is displayed on the LCD monitor. 3. A ash mode indicator will be displayed on the LCD monitor. Use the correct ash to suit the environment.Ê Flash range(Unit: m)ISONormal Macro Auto macroWIDE TELE WIDE TELE WIDE TELEAUTO 0.8~2.68 0.8~1.59 0.2~0.8 0.5~0.8 0.2~2.68 0.5~1.59[Selecting the Auto ash]
034å If you press the shutter button after selecting the ash, the rst ash res to check the shooting condition (Flash range and Power ratio of ash). Do not move the camera until the second ash res. å Using the ash frequently will reduce the life of the battery.å Under normal operating conditions the re-charging time for the ash is usually within 4 seconds. If the battery is weak, the charging time will be longer.å In the DIS mode, [Landscape], [Close up], [Text], [Sunset], [Dawn], [Fireworks] scene modes and the Movie mode, the ash function will not operate.å Take photographs within the ash range.å The image quality is not guaranteed if the subject is too close or highly reective.å When taking an image in poorly lit conditions with the ash, there may be a white speck in the captured image. The speck is caused by the ash light reecting off atmospheric dust.Flash ( ) /Left buttonÊ Flash mode indicatorIcon Flash mode Description Flash offThe ash does not re. Select this mode when capturing images in a place or situation where ash photography is prohibited. When you capture an image in poorly lit conditions, the camera shake warning indicator ( \\ ) will appear on the LCD monitor.Red-eye reductionWhen a shot with "red eye" is detected, this mode will reduce the red-eye effect automatically.Slow synchroThe ash operates with a slow shutter speed to obtain a balanced correct exposure. In poor lighting conditions the camera shake warning indicator ( \\ ) will display on the LCD monitor.Fill in ash The ash res regardless of the available light. The intensity of the ash will be automatically controlled to suit the prevailing conditions.Auto & Red eye reductionIf a subject or background is dark, the camera ash will work automatically and will reduce the red-eye effect by using the red-eye reduction function.Auto ashIf the subject or background is dark, the camera ash will operate automatically.
035Ê Available ash mode, by recording mode ( o : Selectable)Flash ( ) /Left buttonWhen the menu is displayed on the LCD monitor, pressing the Right button makes the cursor shift to the right tab.When the menu is not displayed on the LCD monitor, the Right button operates as the Self-timer ( ) button. This function is used when the photographer would also like to be in the image.å If you operate the Self-timer button during the self-timer operation, the self-timer function is cancelled.å Use a tripod to prevent the camera from shaking.å In Movie mode, only the 10SEC self-timer will work.å Depending on the selected face detection option, the timer is not available or some timer options are not available.Modeo o o o o ooo o o o o ooModeSCENEo o oo o oo o oo o oo oooooooooSelf-timer ( ) /Right buttonå Smart Auto Flash ( ) icon will appear in [Smart Auto] mode.
036Ê Selecting the self-timer1. Select a Recording mode with the exception of Voice recording mode.(p.21)2. Press the Self-timer /Right ( ) button until the desired mode indicator displays on the LCD monitor. A 10 second, 2 second, Double self-timer or Motion timer icon appears on the LCD monitor.3. When you press the shutter button, the picture will be taken after the specied time has elapsed.Self-timer ( ) /Right button[Selecting the 10 SEC self-timer]Ê Self-timer mode indicatorIcon Mode Description10SEC self-timerPressing the shutter button will allow an interval of 10 seconds before the image is taken.2SEC self-timerPressing the shutter button will allow an interval of 2 seconds before the image is taken.Double self-timerA picture will be taken after about 10 seconds and 2 seconds later a second picture will be taken. When using the ash, the 2-second self-timer may be delayed for longer than 2 sec-onds depending on the ash charging time.Motion TimerThe camera detects the subject's movement 6 seconds after pressing the Shutter button, and the picture is taken when the movement is stopped.Ê The Motion Timer ows are as followings. (Movie mode excluded)Selecting the Motion Timer à Pressing the Shutter button à Conrming the composition (Within 6 sec.)*1 à Starting the detec-tion (Swing your hands fully)*2 à Stopping the detection (Do not move) à Taking an image (after 2 sec.)*1: The camera detects the subject's movement 6 seconds after pressing the Shtter button, so conrm the composition within 6 seconds.*2: Move your body or hands fully.Ê Motion TimerMotion Icon & Self-timer lampPressing the Shuter button after setting the Motion TimerBlink (1 second interval)Detecting the subject's movement Blink (0.25 second interval)No movement is detectedTurn on and the image is taken after 2 secondsIn the following cases, the Motion Timer may not operate.å The focus distance is over 3m.å The exposure is too bright or darkå In backlight conditions.å The movement is insignicantå The movement is detected beyond the center part (50%) of the sensor where the movement is recognized.å If the camera doesn't sense any movement for 30 seconds, or the camera doesn’t sense stillness after sensing movement.The detection range of Motion Timer
037MENU button - When you press the MENU button, a menu related to each camera mode will be displayed on the LCD monitor. Pressing it again will return the LCD to the initial display. - A menu option can be displayed when the following are selected : Movie and Still image mode. There is no menu available when the voice recording function is selected. - When the menu is displayed on the LCD monitor, this button is used for shifting the cursor to the sub menu or for conrming data.Use the menu that enables the functions, or the Fn button, to bring up the menus below:Mode MenuAvailable mode Page(Shooting) Photo Size /Movie Sizep.38Quality /Frame Rate p.39EV p.39ISO p.40White Balance p.40Face Detection p.41Face Tone p.43Face Retouch p.43Focus Area p.44Metering p.44Photo Style Selector p.45Image Adjust p.46ACB p.47Drive p.47Voice p.48~49Shooting ( )OK button[Menu off][Menu on][Pressing the MENU button][Pressing the OK button]ShootingSoundDisplaySettingsQualityEVISOWhite BalanceFace DetectionPhoto SizeExit ChangeFocus AreaShootingSoundDisplaySettingsQualityEVISOWhite BalanceFace DetectionPhoto SizeExit ChangeFocus AreaExit BackQualityEVISOWhite BalanceFace DetectionPhoto SizeFocus Area
038Shooting ( ) 3. Select a desired menu by pressing the Up /Down button and then press the OK button. 1. Press the MENU button in an available mode.2. Press the Up /Down button to select the [Shooting] menu and press the Right/OK button.How to Enable Functions Using the MENU ButtonUse the Fn button on the rear of the camera to bring up the menus that enable frequently used functions faster.4. Select a desired menu by pressing the Left /Right button and then press the OK button. Left /Right buttonUp /Down buttonRight/OK buttonå The higher the resolution, the lower the number of shots available because high resolution images require more memory.Photo Size /Movie SizeYou can select the photo size /movie size appropriate for your application.[ Still image mode ][ Movie mode ] (Unit: pixel)Still image modeIconSize4000X30003984X26563840X21603264X24482560X 19202048X 15361920X 10801024X 768Movie modeIconSize640 x 480 320 x 240Appropriate for outdoor photography on a clear day.DaylightBack MoveAdjust the white balance according to the light source.White BalanceBack MoveShootingSoundDisplaySettingsQualityEVISOWhite BalanceFace DetectionPhoto SizeExit ChangeFocus AreaPhoto SizeSet the photo size.Back MoveMovie SizeSet the video size.Back MoveExit BackQualityEVISOWhite BalanceFace DetectionPhoto SizeFocus AreaExit BackQualityEVISOWhite BalanceFace DetectionPhoto SizeFocus AreaExit BackQualityEVISOWhite BalanceFace DetectionPhoto SizeFocus Area
039Shooting ( )å This le format complies with the DCF (Design rule for Camera File system).å JPEG (Joint Photographic Experts Group) : JPEG is the image compression standard developed by the Joint Photographic Experts Group. This type of compression is most commonly used for compressing photos and graphics because it can compress the les efciently.Quality /Frame rateYou can select the compression ratio appropriate for your application of the captured images. The higher the compression ratio, the lower the picture quality.[ Still image mode ] [ Movie mode ]Mode STILL IMAGE mode MOVIE modeIconSub menu Super Fine Fine Normal 30 FPS 15 FPSFile Formatjpeg jpeg jpeg avi aviExposure compensationThis camera automatically adjusts the exposure according to the ambient lighting conditions. You can also select the exposure value by using the [EV] menu.Ê Compensating Exposure1. Click the Up/Down button from the Shooting menu to select [EV] ( ). 2. Use the Left and Right buttons to set the desired exposure compensation factor.3. Press the OK button. The value you set will be saved and the Exposure Compensation setup mode will be closed. If you change the exposure value, the exposure indicator ( ) will be displayed on the Left of the LCD monitor.Ä A negative exposure compensation value reduces the exposure. Note that a positive exposure compensation value increases the exposure and the LCD monitor will appear white or you may not get good pictures.Frame RateSet the number of frames per second for movies.Back MoveBack MoveQualityAdjust the image quality.EVSet exposure value to adjust brightness. Back Move
040White balance The white balance control allows you to adjust the colors to appear more natural.Mode Icon DescriptionAuto WBThe camera automatically selects the ap-propriate white balance settings, depending on the prevailing lighting conditions.Daylight For taking images outside.CloudyFor taking images under a cloudy and over-cast sky.Fluorescent_HFor shooting under daylight uorescent types of three-way uorescent lighting.Fluorescent_L Shooting under white uorescent lighting.TungstenFor shooting under tungsten (standard light bulb) lighting.Custom SetAllows the user to set the white balance ac-cording to the shooting condition.Ä Different lighting conditions may cause a color cast on your images.Shooting ( )ISO [Auto] : The camera's sensitivity is automatically changed by variables such as lighting value or subject brightness. [ISO 80, 100, 200, 400, 800, 1600] : You can increase the shutter speed while the same amount of light is present, by increasing the ISO sensitivity. However, the image may be saturated in high luminance. The higher the ISO value, the higher the camera’s sensitivity to light and therefore the greater its capacity to take pictures in dark conditions. However, the noise level in the image will increase as the ISO value increases, making the image appear coarse.Ä When [Motion Capture] is set, ISO speed will be set to Auto.Ä [ISO] is enabled only in [Program] or [Photo Help Guide] mode.You can select the ISO sensitivity when taking pictures.The speed or specic light-sensitivity of a camera is rated by ISO numbers.Adjust the white balance according to the light source.White BalanceBack MoveISOAdjust the sensitivity of the camera.Back Move
041Shooting ( )Ê NormalThis mode detects the face position of the subject automatically and then sets the focus and exposure. Select this mode for quick and easy face picture.Ä Selectable modes: Program, DIS, Photo Help Guide, Beauty Shot, Portrait, Children, Beach & Snow1. The size and position of the auto focus frame is set at the face of the subject automatically.2. Press the shutter button halfway. The focus frame turns to green when the focus is activated.3. Press the shutter button fully to take a picture.Face DetectionIf you use face detection options, your camera can detect a human face. When focusing on a human face, the brightness of the face is also adjusted. You can also capture natural facial expressions by using self portrait.Ê Using the Custom White Balance White balance settings may vary slightly depending on the shooting environment. You can select the most appropriate white balance setting for a given shooting environment by setting up the custom white balance.1. Select the Custom ( ) menu of the White Balance and place a sheet of white paper in front of the camera so that the LCD monitor shows only white. 2. OK button : Selects previous custom white balance. Shutter button : saves new custom white balance.- The custom white balance value will be applied, starting with the next picture you take.- The user congured white balance will be remain effective until it is overwritten.White paperAdjust face detection settings.Face DetectionBack Move
042Shooting ( ) å This function can detect up to 10 persons. å When the camera recognizes many people at the same time, it will focus on the nearest person.å The Digital zoom is not activated in this mode.å When the camera detects a target face, the white color focus frame will be displayed over the target face and the grey color focus frame appears over the remaining faces. Press the shutter button halfway down to focus on the face and the white focus frame turns green.å Return to previous AF mode if face detection was failure.å In some conditions this function cannot work properly.- When a person wears dark glasses or some part of the face is hidden.- When the person being taken does not look at the camera.- Camera doesn't detect a face as the brightness is too dark or too bright.- The distance between the camera and object is far.å The maximum available Face Detection range is 2.5m (Wide). å The nearer the subject, the faster the camera can recognize the subject.å In [Beauty Shot], [Portrait], and [Children] mode, the [Face Detection] function setting is set to its default value.Ê Self Portrait When taking pictures of yourself, the area of your face is automatically detected so that you can take self pictures more easily and quickly.Ä Selectable modes: Program, DIS, Photo Help Guide, Beauty Shot, Portrait, Beach & Snow1. For self-lming, set the camera lens towards the face of the object. It automatically detects the face of the object, and emits a guiding sound. 2. Start lming by pressing the shutter button.å When locating the face in the center of the screen, it repeatedly emits a faster sound unlike the sounds that are emitted when the face is not in the center.
043Shooting ( )Face ToneThis menu allows you to control the skin tone in images in beauty shot mode. The higher the level you select, the brighter the skin tone. 1. Select [Face Tone] by pressing the Up/Down button. 2. Select a desired face tone by pressing the Left /Right button and then press the OK button. 3. Press the Shutter button to take an image.Face RetouchThis menu allows you to make skin appear clear and beautiful before recording in beauty shot mode. The higher the level selected, the more effective the control. 1. Select [Face Retouch] by pressing the Up/Down button. 2. Select a desired face retouch by pressing the Left /Right button and then press the OK button. 3. Press the Shutter button to take an image.Ê Smile Shot※Selectable modes: Program, DIS, Photo Help Guide, Beauty shot, Portrait, Children, Beach & SnowThe camera automatically takes a picture by detecting the face of the subject although you don’t press the shutter button. If you press the Shutter button, the picture is taken in the normal way. When taking a picture of smile shot, showing teeth or keeping the smiley face of your subject helps detecting the smile face of the subject.Ê Blink Detection※Selectable modes: Program, Photo Help Guide, Portrait, Children, Beach & SnowIf the eyes of the subject are closed when the shutter button is pressed, the camera takes 2 continuous shots and then the images are saved. The camera takes only one picture if the eyes of the subject are open when the Shutter button is pressed.å Detecting the smiling face or the blinking eyes may not be available if any of the following situations occurs:- If the subject is wearing sunglasses.- When the subject is not facing directly to the camera.- If the environmental light is too bright or too dark to detect the face of the subject.- When the camera is far from the subject. (Orange colored focusing mark)- If there is reection of the light or the back light that are too bright.Face ToneSet the level of face tone. (brightening the face)Back MoveFace RetouchSet the level of face retouching.Back Move
044Shooting ( )Auto Focus typeYou can select your preferred Focus Area according to the shooting conditions. [Center AF] () : The rectangular area in the center of the LCD monitor will be focused [Multi AF] () : This camera selects all of available AF point from the 9 AF points.Ä When the camera focuses on the subject, the auto focus frame turns to green. When the camera doesn't focus on the subject, the auto focus frame turns to red.MeteringIf you cannot obtain suitable exposure conditions, you can change the metering method to take brighter pictures.[Multi] ( ) : Exposure will be calculated based on an average of the available light in the image area. However, the calculation will be biased towards the center of the image area. This is suitable for general use.[Spot] ( ) : Only the rectangular area in the center of the LCD monitor will be metered for light. This is suitable when the subject in the center is exposed correctly, regardless of the back lighting.[Center-weighted] ( ) : Exposure will be calculated based on an average of the available light in the image area. However, the calculation will be biased towards the center of the image area. This is suitable for taking a picture of small object like a ower or insects.Ä If the subject is not the center of the focus area, do not use the spot metering as this may result in an exposure error. In this circumstance, it is better to use exposure compensation.Set the autofocus method.Focus AreaBack MoveMeteringSet the light metering option.Back Move
045Shooting ( )Ê Custom RGB : You can change the R (Red), G (Green) and B (Blue) values of the image. - Up/Down button : Selects R, G, B - Left/Right button : Changes the valuesYou can add various effects to the image without using image editing software. 1. Select the desired Photo style selector by pressing the Left/Right button and press the OK button.2. Press the Shutter button to take an image.Style mode Icon DescriptionNormal No style effect is applied.Soft Soft style is applied.Vivid Vivid style is applied.Forest Forest style is applied.Retro Sepia style is applied.Cool Cool style is applied.Calm Calm style is applied.Classic Black & white effect is applied.Negative Negative effect is applied.Custom RGBDene an RGB tone to create your own photo style.Photo Style Selector å When picture style is set, face detection is not available.å When Photo Style Selector is set, Image Adjust function is not available.Back MoveBack MovePhoto Style SelectorSet a photo style to evoke a mood.Back Move
046Shooting ( )Ê Sharpness You can adjust the sharpness of the picture you are about to take. You cannot check the sharpness effect on the LCD monitor before you take a picture, because this function is applied only when the captured image is stored on the memory.Ê Contrast You can change the contrast of the image.1. Select [Contrast] by pressing the Up/Down button.2. Change the contrast by pressing the Left/Right button. 3. Press the Shutter button to take an image. 1. Select [Sharpness] by pressing the Up/Down button. 2. Change the Sharpness by pressing the Left/Right button. 3. Press the Shutter button to take an image.Ê Saturation You can change the saturation of the image.1. Select [Saturation] by pressing the Up/Down button.2. Change the saturation by pressing the Left/Right button. 3. Press the Shutter button to take an image.Image Adjustå When Image Adjust is set, Photo Style Selector function is not available.å When Saturation is set, Face Detection is not available.Back MoveContrastSharpnessSaturationContrastUse normal contrast (default)Back MoveContrastSharpnessSaturationSharpnessUse normal sharpness (default)Back MoveContrastSharpnessSaturationSaturationUse normal color saturation (default)
047Shooting ( )ACBThis function is to adjust the contrast automatically when taking photos in an environment with big exposure difference i.e. backlight or contrast. This function adjusts the brightness automatically and allows the subject to be photographed clearly. - [ACB] Sub menus: [Off], [On] Ä The ACB function is available in [Program], [Portrait] or [Photo Help Guide] recording mode. ACB function always operates in the [Portrait] recording mode.Drive modeYou can select continuous shot, and AEB (Auto Exposure Bracketing).[Single] ( ) : Take one picture only.[Continuous] ( ) : Images will be taken continuously until the shutter button is released.[Motion Capture] ( ) : This takes 5 shots per second, when the shutter is pressed and held down. After completing the continuous shooting, images are saved and the images play back on the Rear LCD. The maximum number of shots is 30 and the image size is xed as VGA.[AEB] ( ) : Take three consecutive photos with varying exposure values. Use this mode if it is hard to decide exposure of the object.å High resolution and picture quality increases le saving time, which increases stand-by time.å If the [Continuous], [Motion Capture], [AEB] sub menu is selected, the ash will be off automatically.å If less than 3 pictures are available on the memory, the AEB shooting is not available.å If less than 30 pictures are available on the memory, the motion capture is not available.å It is best to use a tripod for the AEB shooting as the time to save each image le is longer and blurring caused by camera shake may occur.ACBAuto Contrast Balance automatically compensates for brightness differences.Back MoveSet the shooting type. DriveBack Move
048Voice MemoYou can add your voice-over to a stored still image. (Max. 10 sec.) - If the voice memo indicator is displayed on the LCD monitor, the setting is completed. - Press the shutter button and take a picture. The picture is stored on the memory card. - Voice memo will be recorded for ten seconds from the moment the picture is stored. In the middle of the sound recording, pressing the shutter button will stop the voice memo.Voice RecordingA voice can be recorded for as long as the available recording time (Max. 10 hours) allows. Press the shutter button to record a voice. - Press the shutter button once and voice is recorded for as long as the available recording time (Max.10 hours) allows. The recording time will be displayed on the LCD monitor. Voice will still be recorded if the shutter button is released. - If you wish to stop recording, press the shutter button again. - File type : *.wav Shooting ( )[Voice recording mode]Set the voice memo feature.MemoBack MoveStopEnable voice recording.RecordBack MoveRecord Exit
049 Ê Pausing while recording a voice Using this function, you can record your favorite voice clips into a voice recording le without having to create multiple voice recording les. 1. Press the OK button to pause recording. 2. Press the OK button again to resume the recording. 3. If you wish to stop recording, press the shutter button again. å A distance of 40cm between you and the camera (microphone) is the best distance to record sound.å If the camera power is turned off while the voice recording is paused, the voice recording is cancelled.Shooting ( )Recording the movie clip without voiceYou can record the movie without voice. Select [Off] of [Voice] menu in the Movie mode. ( ) icon will appear on the LCD monitor. Press the Shutter button and a movie will record for as long as the memory capacity allows without voice.[Voice recording mode]Record a video without audio.OffBack MoveStop Pause
050Ê The items indicated by * are default settings.Ä Menus are subject to change without prior notice.You can select a volume of start up sound, shutter sound, beep sound and AF sound. - [Volume] sub menus : [Off], [Low], [Medium]*, [High]VolumeYou can select the sound that is activated whenever the camera is turned on. - Start up sound : [Off]*, [1], [2], [3]Start up soundYou can select the shutter sound. - Shutter sound : [Off], [1]*, [2], [3]Shutter sound If you set sound to ON, a beep will sound when buttons are pressed, letting you know the camera operation status. - [Beep Sound] sub menus : [Off], [1]*, [2], [3]Beep sound Sound (#)Back SetStart Sound :OffShutter Sound :1Beep Sound :1AF Sound :OnVolume :MediumOffLowMediumHighBack SetStart Sound :OffShutter Sound :1Beep Sound :1AF Sound :OnVolume :MediumOff123Back SetStart Sound :OffShutter Sound :1Beep Sound :1AF Sound :OnVolume :MediumOff123Back SetStart Sound :OffShutter Sound :1Beep Sound :1AF Sound :OnVolume :MediumOff123
051If you set AF sound to on, AF sound will be activated when the Shutter button is pressed down half way so that you can be aware of the camera operation status. - [AF sound] sub menus : [Off], [On]*AF sound There is a choice of language that can be displayed on the LCD monitor. Even if the battery is removed and inserted again, the language setting will be preserved.Language Ê The items indicated by * are default settings.Ä Menus are subject to change without prior notice.You can select whether the function description can be displayed on the window in recording mode. - Function Description sub menus [Off] : The function description function can’t be activated. [On]* : The name and description of the option is displayed.Function DescriptionDisplay ( )Sound (#)Back SetStart Sound :OffShutter Sound :1Beep Sound :1AF Sound :OnVolume :MediumOffOnBack SetFunction Description :OnStart Image :OffDisplay Brightness :AutoQuick View :0.5secPower Save :OffLanguage :EnglishEnglish한국어FrançaisDeutschEspañolItalianoBack SetFunction Description :OnStart Image :OffDisplay Brightness :AutoQuick View :0.5secPower Save :OffLanguage :EnglishOffOn
052Display ( ) If you enable Quick View before capturing an image, you can view the image you just captured on the LCD monitor for the duration set in the [Quick View] setup. Quick view is possible only with still images. - Sub menus [Off] : The quick view function can’t be activated. [0.5 sec]*, [1 sec], [3 sec] : The captured image is briey displayed during the selected time.Quick View If you set the [Power Save] to On and the camera isn't operated during the specied time, the LCD monitor will be turned off automatically. - Sub menus [Off]*: The LCD monitor will not be turned off. [On] : If the camera isn't operated during the specied time (about 30 SEC.), the camera power will be idle (Camera status lamp:Blinking) automatically. Ä You can’t set the [Power Save] menu of Playback Mode.Display SaveYou can adjust the LCD brightness. - Sub menus : [Auto]*, [Dark], [Normal], [Bright]Display BrightnessYou can select the image that is rst displayed on the LCD monitor whenever the camera is turned on. - Sub menus : [Off]*, [Logo], [User Image] - Use a saved image for the start-up image with the [Start Image] in the [Resize] menu in the play mode. - The start-up image will not be deleted by [Delete] or [Format] menu. - The User images will be deleted by [Reset] menu.Start up imageBack SetFunction Description :OnStart Image :OffDisplay Brightness :AutoQuick View :0.5secPower Save :OffLanguage :EnglishAutoDarkNormalBrightBack SetFunction Description :OnStart Image :OffDisplay Brightness :AutoQuick View :0.5secPower Save :OffLanguage :EnglishOff0.5sec1sec3secBack SetFunction Description :OnStart Image :OffDisplay Brightness :AutoQuick View :0.5secPower Save :OffLanguage :EnglishOffOnFunction Description :OnStart Image :OffDisplay Brightness :AutoQuick View :0.5secPower Save :OffLanguage :EnglishOFFBack Set
053Formatting a memorySettings ( )All camera menu and function settings will be restored to their default values. However, values for Date & Time, Language, and Video Out will not be changed. - Sub menus [Yes] : A window to conrm the selection will be displayed. Select the [Yes] menu and all settings will be restored to their defaults. [No]* : Settings will not be restored to their defaults.InitializationThis is used for formatting the memory. If you run [Format] on the memory, all images, including the protected images, will be deleted. Be sure to download important images to your PC before formatting the memory. - Sub menus[Yes] : A window for conrming the selection displays. Select the [Yes] menu. A [Formatting] message appears and the memory will be formatted. A [Format is completed] message appears and formatting is nished.[No]* : The memory will not be formatted.Ê Be sure to run [Format] on the following types of memory card. - A new memory card, or an unformatted memory card. - A memory card that has a le this camera can't recognize or one that has been taken from another camera. - Always format the memory card using this camera. If you insert a memory card that has been formatted using other cameras, memory card readers, or PCs, you will get a [Card Error] message.Ê The items indicated by * are default settings.Ä Menus are subject to change without prior notice.Back SetResetDate & Time :OffTime Zone :LondonFile No. :SeriesImprint :OffFormatAuto Power Off :3 minYesNoBack SetResetDate & Time :10/01/01Time Zone :LondonFile No. :SeriesImprint :OffFormatYesNoAuto Power Off :3 min
054Settings ( )This function allows the user to select the le naming format. [Reset] : After using the reset function, the next le name will be set from 0001 even after formatting, deleting all or inserting a new memory card. [Series]* : New les are named using num-bers that follow the previous sequence, even when a new memory card is used, or after formatting, or after deleting all pictures. - The rst stored folder name is 100PHOTO, and the rst le name is SAM_0001. - File names are assigned sequentially from SAM_0001 Ã SAM_0002 Ã ~ Ã SAM_9999. - The folder number is assigned sequentially from 100 to 999 as follows: 100PHOTO Ã 101PHOTO Ã ~ Ã 999PHOTO. - Maximum numbers of les in a folder are 9999. - The les used with the memory card conform to the DCF (Design rule for Camera File systems) format. If you change the image le name, the image may not play back.File nameÊ Available cities: London, Cape Verde, Mid-Atlantic, Buenos Aires, Sao Paulo, Newfoundland, Caracas, La Paz, NewYork, Miami, Chicago, Dallas, Denver, Phoenix, LA, San Francisco, Alaska, Honolulu, Hawaii, Samoa, Midway, Wellington, Auckland, Okhotsk, Guam, Sydney, Darwin, Adelaide, Seoul, Tokyo, Beijing, Hong Kong, Bankok, Jakarta, Yangon, Almaty, Kathmandu, Mumbai, New Delhi, Tashkent, Kabul, Abu Dhabi, Teheran, Moscow, Athens, Helsinki, Rome, Paris, BerlinÄ DST : Daylight Saving TimeSetting up the Date /Time /Date typeYou can change the date and time that will be displayed on the captured images and set up the date type. Setting [Time Zone] enables you to display the local date and time on the LCD monitor when travelling overseas.- Date type : [yyyy/mm/dd], [mm/dd/yyyy], [dd/mm/yyyy], [Off]*Time ZoneBack DSTLondon[GMT +00:00] 2010/01/01 12:00 PMTime ZoneBack SetReset Date & Time :10/01/01Time Zone :LondonFile No. :SeriesImprint :OffFormat Auto Power Off :3 minResetSeriesBack SetReset Date & Time :10/01/01Time Zone :LondonFile No. :SeriesImprint :OffFormat Auto Power Off :3 min2010 /01 /01 12:00 yyyy/mm/ddyyyy mm dd
055Settings ( )Imprinting the recording dateÄ The Date & Time are imprinted at the bottom right side of the still image.Ä The imprint function is applied only to still images.Ä Depending on the manufacturer and print mode, the date printed on an image may not be printed correctly.This function switches the camera off after a set amount of time in order to prevent unnecessary battery drainage. - Sub menus [Off] : The power off function will not operate. [1 min], [3 min]*, [5 min], [10 min] : The power will turn off automatically if not used for the period of time specied. - After replacing the battery, the power off setting will be preserved. - Note that the automatic power off function will not operate if the camera is in the PC /Printer mode, slide show, playing back a voice recording and playing back a movie clip.Auto power offThere is an option to include Date&Time on still images. - Sub menus [Off]* : The Date&Time will not be imprinted on the image le. [Date] : Only the Date will be imprinted on the image le. [Date & Time] : The Date&Time will be imprinted on the image le.Back SetReset Date & Time :10/01/01Time Zone :LondonFile No. :SeriesImprint :OffFormat Auto Power Off :3 minOffDateDate & TimeBack SetReset Date & Time :OffTime Zone :LondonFile No. :SeriesImprint :OffFormat Auto Power Off :3 minOff1 min3 min5 min10 min
056The Video output signal from the camera can be NTSC or PAL. Your choice of output will be governed by the type of device (monitor or TV, etc.) to which the camera is connected. PAL mode can support only BDGHI.Ê Connecting to an external monitorWhen the camera is connected to an external monitor, the image and menus on the LCD monitor will be visible on the external monitor.Selecting Video out typeSettings ( )Yellow - VideoWhite - SoundYou can turn on and off the Auto Focus lamp. - Sub menus [Off] : The AF lamp will not light up in low light conditions. [On]* : The AF lamp will light up in low light conditions.Auto Focus lampBack SetVideo Out :OnUSB :AutoAF Lamp :NTSCOffOnBack SetVideo Out :OnUSB :AutoAF Lamp :OnNTSCPAL
057Settings ( )Setting the USBIf the camera is failed to automatic connection with a PC or a printer using a USB cable, you can manually set [Computer] or [Printer].- [USB] sub menus:[Auto]* : Automatically enables an external device connected with a USB cable.[Computer] : Sets computer connection mode if the connected external device cannot be recognized automatically.[Printer] : Sets printer connection mode if the connected external device cannot be recognized automatically.- NTSC : U.S.A, Canada, Japan, South Korea, Taiwan, Mexico etc.- PAL : Australia, Austria, Belgium, China, Denmark, Finland, Germany, U.K., Holland, Italy, Kuwait, Malaysia, New Zealand, Singapore, Spain, Sweden, Switzerland, Thailand, Norway etc.- When using a TV as an external monitor, you will need to select the external or AV channel of the TV.- There will be a digital noise on the external monitor, but it is not a malfunction.- If the image is not in the center of the screen, use the TV controls to center it.- When the camera is connected to an external monitor, some parts of the image may not be displayed.- When the camera is connected to an external monitor, the menu will be visible on the external monitor and the menu functions are the same as those indicated on the LCD monitor.Back SetVideo Out :NTSCUSB :AutoAF Lamp :OnAutoComputerPrinter
058Starting play mode 2. The last image stored on the memory is displayed on the LCD monitor. 3. Select an image that you want to view by pressing the Left /Right button. Ä Press and hold the Left or Right button to play back the images quickly.Turn the camera on and select Play mode by pressing the play mode button ( g ). The camera can now play back the images stored on the memory. If the memory card is inserted in the camera, all the camera functions apply only to the memory card. If the memory card is not inserted in the camera, all the camera functions apply only to the internal memory.Ê Manner mode To select the Manner mode, press the Play mode button for morethan 5 seconds. In the Manner mode, Operating sound, Effectsound, Start-up sound and Shutter sound will not be generated. To cancel the Manner mode, turn on the camera by pressing the POWER button.Playing back a still image 1. Select the Play mode by pressing the play mode button ( g ).Playing back a movie clip 1. Select the recorded movie clip that you want to play back by using the Left /Right button.2. Press the OK button to play back a movie clip file. - To pause a movie clip file while playing it back, press the OK button again. - Pressing the OK button again will cause the movie clip file to restart. - To rewind the movie clip while it is playing, press the Left button. To fast forward the movie clip, press the Right button. - To stop playback of the movie clip, press the OK button, and then press the Left or Right button.Play Capture
059Playing back a voice memo1. Select a still image that has the voice memo.2. Press the OK button to play back the voice memo. - To pause the voice memo, while playing it back, press the OK button again. - To resume playback of the voice memo, press the OK button.Starting play modeMovie clip capture functionYou can capture still images from the movie clip.Ê How to capture the movie clip 1. Press the OK button while playing the movie clip. Then press the Down button. 2. The paused movie clip is saved as a new file name.Ä The captured movie clip file is the same size as the original movie clip (640x480, 320x240).Ä When you press the down button at the beginning of the movie clip, the first frame of the movie clip will be saved as a still image. Playing back a recorded voice1. Select the recorded voice that you want to play back by using the Left /Right button.2. Press the OK button to play back a recorded voice file.- To pause a recorded voice file, while playing it back, press the OK button again.- To resume playback of the voice file, press the OK button.- To rewind the voice file while it is playing, press the Left button. To fast forward the voice file, press the Right button.- To stop playback of the voice memo, press the Down button.[Paused]PausePlayPlay CapturePlay
060LCD monitor IndicatorThe LCD monitor displays shooting information about the displayed image.No. Description Icon Page1 Playback modegp.582 Voice Memo p.743 DPOF p.754 Protect p.735 Folder name & File name 100-0010 p.546 Memory indicator -7 Battery p.158 ISO 80~1600 p.409 Aperture value F3.5 ~ F15 -10 Shutter speed 8 ~ 1/2,000 -11 Flash On/Off p.3312 Photo Size /Movie Size 4000x3000 ~ 320x240 p.3813 Recording date 2010/01/01 p.54
061Smart AlbumYou can view multiple pictures, enlarge a selected picture, and crop and save a selected area of an image.Thumbnail ( º ) /Enlargement ( † ) button Using the camera buttons to set the camera In Play mode, you can use the buttons on the camera to conveniently set up the Play mode functions. 1. Once a picture has been played back, press the Thumbnail button to run Smart Album mode. 2. Press the Left /Right button to move to a desired image. 3. Press the Digital Zoom button to return to the normal display mode.Thumbnail ( º ) /Enlargement ( † ) button Ê Searching or Deleting Files 1. Press the Thumbnail button in Smart Album. 2. Each time you press the Thumbnail button, the files in a category are displayed in Smart Album screen. 3. Select the file by pressing the Up /Down /Left /Right buttons. 4. Press the Delete(n) button to delete the selected file.Pressing the enlargement button ( † )Pressing the thumbnail button ( º )[Smart Album 3-Thumbnail Window][9-Thumbnail Window] [20-Thumbnail Window][3-Thumbnail Window]å When Smart Album feature runs or a category is selected, it may take few seconds depends on recorded data volume. However, it is not a malfunction please wait until Smart Album screen appears.Ê Smart Album Filter1. Press the MENU button in Smart Album mode.2. Selecting the desired category enables to categorize and search the files by using the Up /Down button.[Highlighted image]2009.01.01Filter1 31211 52010.01.01Filter1 31211 5†º2010.01.01Filter1 31211 52010.01.01Filter1 31211 52010.01.01Filter1 31211 5†º1 31211 5Back Set Type✔Date Color Week
062Ê Trimming : You can extract part of the image that you want and save it separately. 1. Select an image that you want to enlarge and press the enlargement button. Press the OK button and a message will be displayed. 2. Select a desired sub menu by pressing the Up /Down button and press the OK button. - [Yes] : The trimmed image will be saved as a new file name, and appear on the LCD monitor. - [No] : The trimming menu will disappear. Ä If there is not enough memory space to save the trimmed image, the image can’t be trimmed.Ê Image enlargement 1. Select an image that you want to enlarge and press the enlargement button. 2. Different parts of the image can be viewed by pressing the 5 function button. 3. Pressing the thumbnail button will zoom back to the original full sized image. - You can tell whether the image displayed is an enlarged view by checking the image enlargement indicator shown at the top left of the LCD monitor. (If the image is not an enlarged view, the indicator will not be displayed.) You can also check the area of enlargement. - Movie clips and WAV files can’t be enlarged. - If an image is enlarged, a loss of quality may occur.Ê The maximum enlargement rate in proportion to the image sizeÊ Details of Each CategoryCategory Description File FormatTypeCategorized depending on the le type (e.g., picture, video, or voice)Pictures, Videos, VoiceDateCategorized depending on the sequence of recorded dates.ColorCategorized depending on the main color.WeekCategorized depending on the sequence of recorded weeks.Thumbnail ( º ) /Enlargement ( † ) button Image sizeMaximum enlarge-ment rateX12.5 X10.4 X10.0 X10.2 X8.0 X6.4 X5.0 X3.2TrimConfirmTrimming?YesNo
063Play & Pause /OK buttonIn Play mode, the play & pause /OK button works as follows: - When the menu is displayed on the LCD monitor, the OK button is used for confirming data that is changed by using the 5 function button. - If a still image with a voice memo, a voice file, or a movie clip is playing ·In Stop mode : Plays a still image with a voice memo, a voice file, or a movie clip. ·During playback : Temporarily stops playback. ·In Pause mode : Resumes playbackInfo (DISP) /Up buttonWhen the menu is displayed on the LCD monitor, the Up button operates as a direction button.When the menu is not displayed on the LCD monitor, pressing the Info button will display image information on the LCD monitor.Info (DISP) buttonInfo (DISP) buttonInfo (DISP) button[ Voice recording is stopped ] [ Voice recording is playing ] [ Voice recording is paused ]PlayPause StopPlay Stop
064Delete ( n ) buttonThis deletes images stored on the memory. 1. Select an image that you want to delete by pressing the Left /Right button and press the Delete ( n ) button. 2. To add images to delete, select the [Multiple Delete] menu. - Left /Right button : Selects images - OK button : checks for deletion - Fn button : deletes the selected images. 3. Select the submenu values by pressing the Up /Down button and then press the OK button. - If [Yes] is selected : deletes the selected images. - If [No] is selected : cancels "Delete Image".[Single Image] [Thumbnail Image]Left /Right /Down /MENU buttonLeft /Right /Down /MENU buttons activate the following. - Left button : While the menu is showing, the Left button operates as a direction button. While the menu is not showing, press the Left button to select the previous image. - Right button : While the menu is showing, the Right button operates as a direction button. While the menu is not showing, press the Right button to select the next image. - Down button : While the menu is showing, the Down button operates as a direction button. - MENU button : When you press the MENU button, the play mode menu will be displayed on the LCD monitor. Pressing it again will return the LCD to the initial display.Prev NextSelect DeleteSetYesDelete File? Multiple DeleteNo1 31211 5YesNoDelete File? Multiple DeleteSet
065Setting up the play back function using the LCD monitorMenu Tab Main Menu Sub MenuSecondary MenuPageMulti Slide Show( )EffectOff Calm -p.72Sweet Rural -Vivid Lively -Shine Relax -Interval 1, 3, 5, 10 sec - p.72MusicOff Mist -p.72Muse Fall -Dawn Party -Drops Trip -File Options( )DeleteSelect -p.73All Yes /NoProtectSelect -p.73All Unlock /LockVoice memoOff -p.74On -DPOFStandardSelect /All /Resetp.75~p.76Index Yes /NoSizeSelect /All /ResetCopy to CardYes-p.77No-Play mode functions can be changed by using the LCD monitor. In the Play mode, pressing the MENU button displays the menu on the LCD monitor. The menus you can set up in Play mode are as follows. To capture an image after setting up the play menu, press the Play mode button or shutter button.Menu Tab Main Menu Sub Menu PageEdit ( )Resize2560x1920 2048x1536p.671024X768 2592X17281776X1184 2560X14401920X1080 Start ImageRotateRight 90˚ Left 90˚p.68180˚ HorizontalVertical -Photo Style SelectorNormal Softp.68Vivid ForestRetro CoolCalm ClassicNegative Custom RGBImage AdjustOff ACBp.69Red-eye Fix Face RetouchBrightness ContrastSaturation Add Noise Multi Slide Show( )Start Play /Repeat - p.71ImagesAll Datep.71Select -
066Menu Tab Main Menu Sub Menu Secondary Menu PageXImagesOne Photo -p.79All Photos -SizeAuto -p.79PostCard -Card -4X6 - L -2L -Letter -A4 -A3 -LayoutAuto -Full -1 -2 -4 -8 -9 -16 -Index -This menu is available while the camera is connected to a PictBridge supporting printer (direct connection to the camera, sold separately) with a USB cable.Setting up the play back function using the LCD monitorÄ Menus are subject to change without prior notice.Menu Tab Main Menu Sub Menu Secondary Menu PageXTypeAuto -p.79Plain -Photo -Fast Photo -QualityAuto -Draft -Normal -Fine -DateAuto -Off -On -File NameAuto -Off -On -ResetYes -p.80No -
067Edit ( )o o ooo o o - A large sized image can be resized to a smaller sized image, but not vice versa. - Only JPEG images can be resized. Movie clip (AVI), Voice recording (WAV) files can’t be resized. - You can change the resolution of only those files compressed in the JPEG 4:2:2 format. - The resized image will have a new file name. The [Start Image] image is stored not on the memory card but on the internal memory. - If a new user image is saved, the original user image will be deleted. - If the memory capacity is insufficient to store the resized image, a [Memory Full] message will appear on the LCD monitor and the resized image can't be stored.Change the resolution (size) of pictures taken. Select [Start image] to save an image to be the start-up image. 1. Press the play mode button and press the MENU button. 2. Click the Up /Down button from the Edit menu to select [Resize] ( ) menu tab and press the OK button. 3. Select a desired sub menu by pressing the Left /Right button and press the OK button.Ê Image Resize Types ( o : Selectable)ResizeBack MoveResizeo o o oo o o oo o oo oo
068Edit ( )You can rotate the stored images by various degrees. 1. Press the play mode button and press the MENU button. 2. Click the Up /Down button from the Edit menu to select [Rotate] ( ‹ ) menu tab and press the OK button. 3. Select a desired sub menu by pressing the Left /Right button and press the OK button. If you display the rotated image on the LCD monitor, empty spaces may appear to the left and right of the image.[ : Horizontal] : Rotate picture horizontally[ ® : Vertical] : Rotate picture vertically [ ¢ : Right 90˚] : Rotate picture in a clock-wise direction[ ¡ : Left 90˚] : Rotate picture in a counter-clock-wise direction[ £ : 180˚] : Rotate picture 180 degreesIt is possible to add various effects to your images by using this function.1. Press the play mode button and press the MENU button. 2. Click the Up /Down button from the Edit menu to select [Photo Style Selector] ( ) menu tab and press the OK button.3. Select a desired sub menu by pressing the Left /Right button and press the OK button.Rotating an imagePhoto Style Selector Style mode Icon DescriptionNormal No style effect is applied.Soft Soft style is applied.Vivid Vivid style is applied.Forest Forest style is applied.Retro Sepia style is applied.Cool Cool style is applied.Calm Calm style is applied.Classic Black & white effect is applied.Negative Negative effect is applied.Custom RGBDene an RGB tone to create your own photo style. 4. The changed image is saved as a new file name. After using [Edit] feature, the edited image will be saved as a smaller size than the original image. (Only with image size from 8M)Back MoveRotateBack Move180˚Back MoveLeft 90˚Back MoveRight 90˚Back MoveBack MoveVerticalHorizontalBack MovePhoto Style Selector
069Edit ( )Image Adjust 1. Press the play back button and press the MENU button. 2. Click the Up /Down button from the Edit menu to select [Image Adjust] ( ) menu tab and press the OK button.Ê ACBYou can automatically adjust the brightness of the dark area, caused by under exposure to the light source.1. Select ( ) by pressing the Left /Right button and press the OK button.2. The [Making New Image] message is displayed and the image is saved as a new file name.- OK button : Select /setup the Custom Color- Up /Down button : Selects R, G, B- Left /Right button : Change the valuesÊ Custom RGB You can change the R (Red), G (Green) and B (Blue) values of the image. Ê Face RetouchYou can make the skin in an image appear clear and beautiful.1. Select ( ) by pressing the Left /Right button and press the OK button. Then a bar for selecting the face retouch will be displayed. 2. Change the face retouch by pressing the Left /Right button. 3. Press the OK button and the image will be saved as a new file name. Ê Red eye Removal Red eye effect can be removed from the captured image.1. Select ( < ) by pressing the Left /Right button and press the OK button. 2. The [Making New Image] message is displayed and the image is saved as a new file name. Back MoveBack MoveBack MoveACBBack MoveFace RetouchBack MoveRed-eye Fix
070Ê Brightness control You can change the brightness of the image.1. Select ( ) by pressing the Left /Right button and press the OK button. Then a bar for selecting the brightness will be displayed. 2. Change the brightness by pressing the Left /Right button. 3. Press the OK button and the image will be saved as a new file name. Edit ( )Ê Saturation control You can change the saturation of the image.1. Select ( ) by pressing the Left /Right button and press the OK button. Then a bar for selecting the saturation will be displayed.2. Change the saturation by pressing the Left /Right button. 3. Press the OK button and the image will be saved as a new file name. Ê Contrast control You can change the contrast of the image.1. Select ( @ ) by pressing the Left /Right button and press the OK button. Then a bar for selecting the contrast will be displayed.2. Change the contrast by pressing the Left /Right button. 3. Press the OK button and the image will be saved as a new file name. Back MoveContrastÊ Noise effectYou can add noise to an image to add a more classic feel to your photo.1. Select ( ) by pressing the Left /Right button and press the OK button.2. The [Making New Image] message is displayed and the image is saved as a new file name.Back MoveBrightnessBack MoveSaturationBack MoveAdd Noise
071You can select image to view1. Use the Up /Down button to select the [Images] menu and press the Right button.2. Select a desired sub menu by pressing the Up /Down button.[All] : All images saved on the memory are played back. Press the OK button and the settings are saved.[Date] : Images taken in a specified date are played back. Press the OK button and the settings are saved.[Select] : Play only the selected images. If you press the Up /Down button, you can select the desired images to play back. The selected image can be saved as [Select1], [Select2] and [Select3]. If you save the selected image with the [New Select] command, it will be saved as [Select1]. But when a new image is saved again using [New Select], the former image which had been saved as [Select1] will be saved as [Select2] automatically.You can change and cancel the images which were saved as [Select1], [Select2] and [Select3]. Press the Fn button and the settings are saved.3. Select [Play] or [Repeat] in the [Start] menu to start the multi slide show.Selecting ImagesStarting the Multi Slide Show ( )Images can be displayed continuously at pre-set intervals. You can view the Multi Slide Show by connecting the camera to an external monitor.1. Press the play mode button and press the MENU button.2. Press the Up /Down button and select the [Multi Slide Show] menu tab and press the OK button.Start the Multi Slide ShowThe Multi Slide Show can start only in the [Start] menu. 1. Use the Up /Down button to select the [Start] menu and press the Right button. 2. Select a desired sub menu by pressing the Up /Down button. [Play] : The Multi Slide Show is closed after one cycle. [Repeat] : The Slide show is repeated until cancelled. 3. Press the OK button and the slide show will be started. - To pause the slide show while playing it back, press the OK button again. - Pressing the OK button again will cause the Multi Slide Show restart. - To stop playback of the Multi Slide Show, press the OK button, and then press the Left or Right button.Back SetImages :AllEffect :OffInterval :1 secMusic :OffStart AllDateSelectBack SetImages :AllEffect :OffInterval :1 secMusic :OffStart PlayRepeat
072Starting the Multi Slide Show ( )Unique screen effects can be used for the Multi Slide Show.1. Select the [Effect] sub menu by pressing the Up /Down button and press the Right button.2. Use the Up /Down button to select the type of effect.3. Press the OK button to confirm the setting.Congure Multi Slide show effectsSet the Multi Slide Show music.1. Select the [Music] sub menu by pressing the Up /Down button and press the Right button.2. Use the Up /Down button to select the desired Music.3. Press the OK button to save the configuration.Setting Background MusicSetting play interval Set the Multi Slide Show play interval.1. Select the [Interval] sub menu by pressing the Up /Down button and press the Right button.2. Use the Up /Down button to select the desired interval.3. Press the OK button to save the configuration.å The loading time depends on the image size and quality.å While the Multi Slide Show is playing, the Movie clips and voice recording files will not display.å The interval menu functions only when the Effect is set to [Off].Back SetImages :AllEffect :OffInterval :1 secMusic :OffStart OffMistMuseFallDawnPartyBack SetImages :AllEffect :OffInterval :1 secMusic :OffStart 1 sec3 sec5 sec10 secBack SetImages :AllEffect :OffInterval :1 secMusic :OffStart OffCalmSweetRuralVividLively
073File Options ( )Deleting images1. Press the Up /Down button and select the [Delete] menu tab. And then press the Right button.2. Select a desired sub menu by pressing the Up /Down button and press the OK button.[Select] : Selection window for an image to delete is displayed.- Up /Down /Left /Right : Select an image- OK button : Select the image for deletion. ( Ë mark)- Fn button : Press the Fn button to display the confirmation message. Select the [Yes] menu and press the OK button to delete marked images.[All] : Displays confirmation window. Select the [Yes] menu and press the OK button to delete all unprotected images. If there aren’t protected images, all the images are deleted and a [No Image File] message will appear.3. After deletion, the screen will be changed to the play mode screen.This deletes images stored on the memory.1. Press the play mode button and press the MENU button.2. Press the Up /Down button and select the [File Options] menu tab and press the OK button.å Of all the files stored on the memory, the unprotected files in the DCIM subfolder will be deleted. Remember that this will permanently delete unprotected images. Important shots should be stored on a computer before deletion takes place. The startup image is stored on the camera's internal memory (i.e., not on the memory card) and it will not be deleted even if you delete all files on the memory.Protecting imagesThis is used to protect specific shots from being accidentally erased (Lock). It also unprotects images that have been previously protected (Unlock).1. Press the Up /Down button and select the [Protect] menu tab. And then press the Right button.2. Select a desired sub menu by pressing the Up /Down button and press the OK button.[Select ] : Selection window for an image to be protected /released is displayed.- Up /Down /Left /Right : Select an image- OK button : Protect /release the image- Fn button : Your changes will be saved and the menu will disappear.Delete All File(s)?YesNoSetSelect Delete1 31211 5Back SetProtectVoice memo :OffDPOFCopy to CardDeleteSelectAllSelect Set1 31211 5Back SetProtectVoice memo :OffDPOFCopy to CardDeleteSelectAll
074File Options ( )You can add your voice to a stored still image. Voice memo - Press the shutter button, the voice will record for 10 seconds. - To stop the recording, press the shutter button.[Ready for recording] [Voice is recording][Voice memo menu][All] : Protect /release all saved images- If you protect an image, the protect icon will be displayed on the LCD monitor. (An unprotected image has no indicator)- An image in LOCK mode will be protected from the delete function or [Delete] function, but will NOT be protected from the [Format] function.Start Stop Protect All?LockUnlockSetBack SetProtectVoice memo :OffDPOFCopy to CardDeleteOffOn
075File Options ( )Ê Standard This function allows you to embed printing quantity information on a stored image.1. Press the Up /Down button and select the [DPOF] menu tab. And then press the Right button.2. Press the Right button again and [Standard] sub menu will display. 3. Select a desired sub menu by pressing the Up /Down button and press the OK button. [Select] : Selection window for an image to print is displayed.- Up /Down /Left /Right : Select an image to print.- Zoom button : Select the number of prints. [All] : Configure number of prints for all pictures except movie and voice files.- Up /Down button : Select a number of prints [Reset] : Cancel the print setup.4. Press the OK button to confirm the setting. If an image carries DPOF instruction, the DPOF indicator ( ) will show.Ê DPOF(Digital Print Order Format) allows you to embed printing information on your memory card’s MISC folder. Select the pictures to be printed and how many prints to make.Ê The DPOF indicator will display on the LCD monitor when an image that has DPOF information plays back. Images can then be printed on DPOF printers, or at an increasing number of photo labs.Ê This function is not available for Movie clips and Voice recording files.Ê When the wide angle image is printed as a wide angle print, 8% of the left and right side of the image may not be printed. Check that your printer can support the wide angle image when you print the image. When you print the image at a photo lab, request that the image is printed as a wide angle image. (Some photo labs may not support the wide angle size print.) DPOFå Depending on the printer, the image saved in portrait orientation may not be printed in portrait orientation.Quantity Set0102000000011 31211 5Quantity SetBack SetProtectVoice memo :OffDPOFCopy to CardDeleteStandardIndexSizeSelect ImageSelectAllReset
076Ê Index Images (except for movie clips and voice files) are printed as index type.1. Press the Up /Down button and select the [DPOF] menu tab. And then press the Right button.2. Select the [Index] menu and press the Right button again. Sub menu will display.3. Select a desired sub menu by pressing the Up /Down button. If [Yes] is selected : The image will be printed in index format. If [No] is selected : Cancel the index print setting.4. Press the OK button to confirm the setting.File Options ( )Ê Print size You can specify the print size when printing images stored on the memory card. The [Size] menu is available only for DPOF 1.1 compatible printers.1. Press the Up /Down button and select the [DPOF] menu tab. And then press the Right button.2. Select the [Size] menu and press the Right button again. Sub menu will display. 3. Select a desired sub menu by pressing the Up /Down button and press the OK button. [Select] : Selection window to change the printed size of the image is displayed. - Up /Down /Left /Right : Select an image. - Zoom W/T Button : Change the print size. - Fn button : Your changes will be saved and the menu will disappear. [All] : Change print size of all saved images. - Up /Down button : Select a print size - OK button : Confirm the changed setting. [Reset] : Cancel all of the print size settings.Ä DPOF [Size] secondary menu : Cancel, 3X5, 4X6, 5X7, 8X10å Depending on the manufacturer and print model, cancelling the printing may take a little longer for the printer to process.Size Set3X5CancelCancel CancelCancelCancel1 31211 5Size SetBack SetProtectVoice memo :OffDPOFCopy to CardDeleteStandardIndexSizeSelect ImageSelectAllResetBack SetProtectVoice memo :OffDPOFCopy to CardDeleteStandardIndexSizeSetting Index?YesNo
077This enables you to copy image files, movie clips and voice recording files to the memory card.Copy to Card1. Select the [Copy to Card] menu tab by pressing the Up /Down button. And then press the Right button.2. Select a desired sub menu by pressing the Up /Down button and press the OK button. - [Yes] : All images, movie clips and voice recording files saved in the internal memory are copied to the memory card after the [Copying] message is displayed. After copying has been completed, the screen will return to play mode. - [No] : Cancels "Copy to Card".File Options ( )å If there is not enough space available on the memory card to copy saved images on the internal memory (About 9.9MB), the [Copy to Card] command will copy only some of the images and display [Memory Full] message. Then the system will return to the playback mode. Please be sure to delete any unnecessary files to free up space before inserting the memory card into the camera.å When you move the images that are stored on the internal memory by doing [Copy to Card] to the card, the next number of file names will be created on the card to avoid duplication of the file name. - When the [Reset] of the [File No.] setup menu is set : The copied file names start from after the last stored file name. - When the [Series] of the [File No.] setup menu is set : The copied file names start from after the last captured file name. After completing [Copy to Card], the last stored image of the last copied folder is displayed on the LCD monitor. Back SetProtectVoice memo :OffDPOFCopy to CardDeleteYesNo
078PictBridgeYou can use the USB cable to connect this camera to a printer that supports PictBridge (sold separately) and print the stored images directly. Movie clips and voice files cannot be printed.Ê Connecting the Camera to a PrinterÊ Setting up the camera for connection to the printer 1. Connect the camera and printer with USB cable. 2. Once the camera is turned on, the camera automatically recognizes the printer and is connected to it.Ä If automatic connection fails, set the [USB] menu to [Printer]. (p.57)Ä For a printer that can enable removable disk, set the [USB] menu to [Printer].Ê Easy printing When you connect the camera to printer in the Play back mode, you can print a picture easily. - Pressing the Left /Right button : Selects a previous /next image.- Pressing the OK button : Currently displayed image will be printed with the printer’s default settings. Print Menu
079PictBridge : Picture SelectionYou can select images you want to print.Ê Setting the Number of Copies to Print1. Press the MENU button and the PictBridge menu will display.2. Use the Up /Down button to select the [Images] menu and press the Right button.3. Use the Up /Down button to select a desired sub menu and press the OK button. - Select [One Photo] or [All Photos]. A screen where you can set the number of copies to print will appear as shown below. - Press the Up /Down button to select the number of prints. - When [One Photo] is selected : Use the Left /Right button to select another picture. After selecting another picture, select the number of prints for another picture. - After setting the number of prints, press the OK button to save. - Press the Shutter button to return to the menu without setting the number of prints. 4. Press the play mode button ( g ) and images will be printed.PictBridge : Print SettingYou can select the Paper Size, Print Format, Paper Type, Print Quality, Date Print, and File Name Print menus for printed pictures. 1. Press the MENU button and the PictBridge menu will display. 2. Use the Up /Down button to select the desired menu, and then press the Right button. 3. Use the Up /Down button to select the desired sub menu value, and then press the OK button.Ä Some menu options are not supported on all printers. If not supported, the menus are still displayed on the LCD, but are not selectable.Menu Function Sub menuSizeSet the size of the printing paperAuto, PostCard, Card, 4X6, L, 2L, Letter, A4, A3LayoutSet the number of pictures to be printed on a sheet of paperAuto, Full, 1, 2, 4, 8, 9, 16, IndexTypeSet the quality of the printing paperAuto, Plain, Photo, Fast PhotoQualitySet the quality of the picture to be printedAuto, Draft, Normal, FineDateSet whether to print the dateAuto, Off, OnFile NameSet whether to print the file nameAuto, Off, On[When [One Photo] is selected][When [All Photos] is selected]Quantity Set1Quantity Set0 Back SetSize :AutoLayout :AutoType :AutoQuality :AutoImages :One PhotoOne PhotoAll PhotosBack SetSize :AutoLayout :AutoType :AutoQuality :AutoImages :One PhotoAutoPostcardCard4x6L2L
080PictBridge : ResetInitializes user-changed configurations.1. Use the Up /Down button to select the [Reset] menu tab. And then press the Right button.2. Use the Up /Down button to select the desired sub menu and then press the OK button. If [Yes] is selected : All print and image settings will be reset. If [No] is selected : Settings will not be reset.Ä Default print setting varies depending on the printer manufacturer. For your printer’s default setting, refer to the user’s guide that came with your printer.Important notesBe sure to observe the following precautions!å This unit contains precision electronic components. Do not use or store this unit in the following locations. - Areas exposed to severe changes in temperature and humidity. - Areas exposed to dust and dirt. - Areas exposed to direct sunlight or the inside of a vehicle in hot weather. - Environments where there is high magnetism or excessive vibration. - Areas with high explosives or highly flammable materials.å Do not leave this camera in places subject to dust, chemicals (like naphthalene and mothballs), high temperature and high humidity. Keep this camera with silica gel in a hermetically sealed box when not planning to use the camera for a long period of time.å Sand can be particularly troublesome to cameras. - Do not let sand get inside the camera when using it on beaches, coastal dunes, or other areas where there is lots of sand. - Doing so may result in failure or may permanently render the camera unusable.å Handling the camera - Never drop the camera or subject it to severe shocks or vibrations. - Protect the large size LCD monitor from an impact. When this camera is not used, keep it in the camera case. - Avoid obstructing the lens or the flash when you capture an image. - This camera is not waterproof. To avoid dangerous electrical shocks, never hold or operate the camera with wet hands. - If you use this camera in wet places, such as beach or pool, do not let water or sand get inside the camera. Doing so may result in failure or may permanently damage the unit.Back SetFile Name :AutoReset NoDate :AutoYesNo
081å Extremes in temperature may cause problems. - If the camera is transferred from a cold to a warm and humid environment, condensation can form on the delicate electronic circuitry. If this occurs, turn the camera off and wait for at least 1 hour until all moisture is dispersed. Moisture built up can also occur on the memory card. If this happens, turn off the camera and remove the memory card. Wait until the moisture has dispersed.å Caution on Using the Lens - If the lens is subjected to direct sunlight, it could result in the discoloration and deterioration of the image sensor. - Take care not to get fingerprints or foreign substances on the surface of the lens.å If the digital camera is not used for a long period, an electric discharge can occur. It is a good idea to remove the battery and the memory card if you do not intend using the camera for an extended period of time.å If the camera is exposed to an electronic interference, it will turn itself off to protect the memory card.å Camera Maintenance - Use a soft brush (available from photo stores) to gently clean the lens and LCD assemblies. If this does not work, lens-cleaning paper with lens cleaning fluid can be used. Clean the camera body with a soft cloth. Do not allow this camera to come into contact with solvent materials such as benzol, insecticide, thinners etc. This may damage the body shell of the camera and also affect its performance. Rough handling can damage the LCD monitor. Take care to avoid damage and keep the camera in its protective carry case at all times when not in use.å Do not attempt to disassemble or modify the camera.å Under certain conditions, static electricity can cause the flash unit to fire. This is not harmful to the camera and is not a malfunction.å When images are uploaded or downloaded, the data transfer may be affected by static electricity. In this case, disconnect and re-connect the USB cable before trying the transfer again.å Before an important event or going on a trip, you should check the camera condition. - Take a picture for testing the camera condition and prepare extra battery. - Samsung cannot be held responsible for camera malfunctions. å If the digital camera is not used for a long period, the date and time may adopt the default settings by automatical battery discharged. In this case, reset the date and time correctly before the recording.Important notes
082Warning indicatorThere are several warnings that may appear on the LCD display.[Card Error]åMemory card error à Turn off the camera power and turn it on again à Insert the memory card again à Insert and format the memory card (p.53)[Card Locked]åThe memory card is locked à SD/SDHC memory card : Slide the write protect switch to the top of the memory card[Memory Full]å The memory card or internal memory is full à Insert new memory card à Delete the unnecessary image files[No Image File]åThere are no images stored on the memory à Take images à Insert a memory card that is holding some images[File Error]åFile error à Delete the fileåMemory card error à Contact a camera service center[Low Battery]åThere is low battery capacity à Insert fresh battery
083Before contacting a service centerThe camera doesn’t switch onåThere is low battery capacity à Insert fresh battery (p.15)åBattery is inserted incorrectly with the polarities reversed à Insert the battery according to the polarity marks (+, -)The camera power ceases while in useåThe battery is exhausted à Insert fresh batteryåThe Camera is turned off automatically à Turn on the camera power againå Operation has ceased in a low temperature outside of the camera usage temperature range à Make the camera and battery warm by placing them in your pocket, etc. and then immediately before shooting, place the battery in the camera and then shootPlease check the following. Camera does not take images when pressing the Shutter buttonåThere is insufficient memory capacity à Delete unnecessary image filesåThe memory card has not been formatted à Format the memory card (p.53)åThe memory card is exhausted à Insert a new memory cardåThe memory card is locked à Refer to [Card Locked] error message (p.82)åThe camera's power is off à Turn the camera power onåThe battery is exhausted à Insert fresh battery (p.15)åBattery is inserted incorrectly with the polarities reversed à Insert the battery according to the polarity marks (+, -)The camera suddenly stops working while in useåThe camera stopped due to a malfunction à Remove /re-insert battery and switch the camera onThe images are unclearå A picture was taken of the subject without setting an appropriate macro mode à Select an appropriate macro mode to take a clear imageåTaking a picture beyond the flash range à Take a picture within the flash rangeåThe lens is smudged or dirty à Clean the lens
084Before contacting a service centerThe flash does not fireåFlash off mode has been selected à Dis-engage flash off modeåThe camera mode can't use the flash à Refer to the FLASH instruction (p.33)Incorrect date and time is displayedå The date and time have been set incorrectly or the camera has adopted the default settings ÃReset the date and time correctlyThe camera buttons do not operateåCamera malfunction à Remove/re-insert battery and switch the camera onA card error has occurred while the memory card is in the cameraåIncorrect memory card format à Re-format the memory cardThe images don't play backåIncorrect file name (Violation of DCF format) à Do not change the image file nameColor of image is different to the original sceneåWhite balance or effect setting is incorrect à Select appropriate White balance and effectImages are too brightåExposure is excessive à Reset exposure compensationNo image on external monitorå The external monitor has not been connected properly with the camera à Check the connection cablesåThere are incorrect files on the memory card à Insert a memory card that has correct filesWhen using the PC’s explorer, the [Removable Disk] le does not showåCable connection is incorrect à Check the connectionåThe camera is off à Turn the camera onå The operating system is not Windows XP, Vista, 7 /Mac OS 10.3. Alternatively the PC does not support USB à Install Windows XP, Vista, 7 /Mac OS 10.3 to PC that supports USBA part of the LCD screen does not occasionally turn on or a spot appearså Although the LCD screen is manufactured with high precision technology, the precision pixels are not occasionally lighted or the red, white and blue spots appearà This phenomenon does not affect the quality of the recorded image and it is not a malfunctionA vertical line appears on the LCD screen when taking a picture of a bright objectå If a subject is exposing bright lights, a gray, black, red or purple vertical line may appearà This is a phenomenon called smear and it does not affect the quality of the recorded image. This is not a malfunction
085SpecicationsImage Sensor - Type : 1/2.33" CCD - Effective Pixels : Approx. 12.2 Mega-pixels - Total Pixels : Approx. 12.3 Mega-pixelsLens - Focal Length : SAMSUNG Lens f = 4.9 ~ 24.5mm (35mm film equivalent : 27 ~ 135mm) - F No. : F3.5(W) ~ F5.9(T) - Digital Zoom : ·Still Image mode :1.0X ~ 3.0X ·Play mode : 1.0X ~ 12.5X (depends on image size)Image Stabilization - DIS (Digital Image Stabilization)LCD Monitor - 2.7" color TFT LCD (230,000 dots) Focusing - Type : TTL auto focus (Multi AF, Center AF, Face Detection AF) - RangeNormal Macro Auto MacroWide 80cm ~ Infinity 5cm ~ 80cm 5cm ~ InfinityTele 100cm ~ Infinity 100cm ~ 150cm 100cm ~ InfinityShutter - Smart Auto : 8 ~ 1/2,000 sec., Program : 1 ~ 1/2,000 sec., Night : 8 ~ 1/2,000 sec., Fireworks : 2 sec.Exposure - Control : Program AE - Metering : Multi, Spot, Center-Weighted, Face Detection AE - Compensation : ±2EV (1/3EV steps) - ISO : Auto, 80, 100, 200, 400, 800, 1600Flash - Modes : Auto, Auto & Red-eye reduction, Fill-in flash, Slow sync, Flash off, Red Eye Fix - Range : Wide : 0.2m ~ 2.68m Tele : 0.5m ~ 1.59m (ISO AUTO) - Recharging Time : Approx. 4 secSharpness - Soft+, Soft, Normal, Vivid, Vivid+White Balance - Auto, Daylight, Cloudy, Fluorescent_H, Fluorescent_L, Tungsten, Custom Voice Recording - Voice Recording (max. 10 hours) - Voice Memo in Still Image (max. 10 sec.)Date Imprinting - Date, Date & Time, Off (user selectable)Shooting - Still Image ·Mode : Smart Auto, Program, DIS, Photo Help Guide, Scene ·Scene : Beauty Shot, Frame Guide, Night, Portrait, Children, Landscape, Close-up, Text, Sunset, Dawn, Backlight, Fireworks, Beach & Snow ·Shooting : Single, Continuous, Motion Capture, AEB ·Smart Auto : Macro, Macro Text, White, Landscape, Action, Tripod, Night, Night Portrait, Backlight, Backlight Portrait, Portrait, Macro Portrait, Blue Sky, Sunset Sky, Macro Color, Natural Green ·Self-timer : 10 sec., 2 sec., Double, Motion Timer
086 - Movie clip · With Audio or without Audio (user selectable, recording time : max 2 hours) ·Size : 640x480, 320x240 · Frame rate : 30 fps, 15 fps · 5X Optical Zoom and Mute in Zooming · Movie Editing (Embedded): Pause during recording, Still Image CaptureStorage - Media ·Internal memory : About 9.9MB flash memory · External memory (Optional) : SD card (Up to 2GB guaranteed) SDHC card (Up to 8GB guaranteed) - File Format ·Still Image : JPEG (DCF), EXIF 2.21, DPOF 1.1, PictBridge 1.0 ·Movie clip : AVI (MJPEG) ·Audio : WAV - Image Size4000x30003984x26563840x21603264x24482560x19202048x15361920x10801024x768 - Capacity (1GB Size)Super FineAbout 147About 167About 202About 211About 339About 532About 870About 1471FineAbout 284About 309About 367About 374About 566About 802About 1144 About 1670NormalAbout 403About 441About 528About 537About 792About 1065About 1437 About 1872 Ä These figures are measured under Samsung standard conditions and may vary depending on shooting conditions and camera settings.Effect - Shooting : Photo Style Selector, Image Adjust (Sharpness, Contrast, Saturation) - Editing : Resize, Rotate, Photo Style Selector, Image Adjust (ACB, Face Retouch, Red-Eye Fix, Brightness, Contrast, Saturation, Add Noise)Image Play - Type : Single image, Thumbnails, Smart Album, Multi slide show, Movie clipÄ Multi slide show : Slide show with Effect & Music Interface - Digital output connector : USB 2.0 - Audio : Microphone: Mono, Internal Speaker: Mono - Video output : NTSC, PAL (user selectable) - DC power input connector : 4.2 VSpecifications
087Power Source - Rechargeable battery : BP70A, 3.7V (740mAh)Ä Included battery may vary depending on sales region.Dimensions (WxHxD) - 96.3 X 58 X 21.1mm (excluding protrusions)Weight - Approx. 119.1g (without battery and card)Operating Temperature - 0 ~ 40°COperating Humidity - 5 ~ 85%Software - Intelli-studio, Adobe Reader Specifications are subject to change without prior notice. All trademarks are the property of their respective owners.Specifications
088Item RequirementsCPUIntel® Pentium®4 3.0 GHz or higherAMD Athlon™ FX 2.2 GHz or higherRAM 512 MB or more (1 GB or more recommended)OS Windows XP/Vista/7Others- USB port- CD-ROM drive- nVIDIA Geforce 7600GT or higher Ati X1600 series or higher- 1024 X 768 pixels, 16-bit color display compatible monitor (1280 X 1024 pixels, 32-bit color display recommended)- Microsoft DirectX 9.0c or laterTransferring les to your computer (for Windows)For Windows usersTransfer files by connecting your camera to your PC.Ê Installing programsHardware and software requirementså Using a self-assembled PC or a PC and OS that are not supported may void your warranty.å The programs may not work properly on 64-bit Edition of Windows XP, Vista and 7.å Intelli-studio may not perform correctly on some computers, even when the computer meets the requirements.å If your computer does not meet the requirements, videos may not play correctly or it may take longer to edit videos.å Install DirectX 9.0c or above before you use the program.Ê Programs contained on the CDProgram PurposeIntelli-studio Edit photos and videos.Adobe Reader View the user manual.
089Transferring les to your computer (for Windows)1. Insert the installation CD in a compatible CD-ROM drive.2. When the setup screen is displayed, click Samsung Digital Camera Installer to start installation.3. Select programs to install and follow the onscreen instructions.4. Click Exit to complete the installation and restart your computer.Ê Transferring files to your PCOnce you connect the camera to your PC, the camera will be recognized as a removable drive.1. Connect your camera to your PC with the USB cable.å The battery will be charged while the camera is connected to a PC with the USB cable.å You must plug the end of the cable with the indicator light (▲) into your camera. If the cable is reversed, it may damage your les. The manufacturer is not responsible for any loss of data.
0902. Turn on the camera. - The computer recognizes the camera automatically.3. On your PC, select [My Computer à Removable Disk à DCIM à 100PHOTO].4. Select the files you want and drag or save them to your PC.Ê Disconnecting the camera (for Windows XP)The way to disconnect the USB cable for Windows Vista/7 is similar.1. If the status lamp on your camera is blinking, wait until it stops.2. Click on the tool bar at the bottom right of your PC screen.3. Click the pop-up message.4. Remove the USB cable.å If the camera fails to connect, a pop-up window will appear. Select Computer.Transferring les to your computer (for Windows)
091å You cannot edit les directly on the camera. Transfer les to a folder on your computer before editing.å You cannot copy les in your computer to the camera.å Intelli-studio supports the following formats:- Videos: AVI(MJPEG), MP4 (Video: H.264, Audio: AAC), WMV (WMV 7/8/9)- Photos: JPG, GIF, BMP, PNG, TIFFTransferring les to your computer (for Windows)Ê Using Intelli-studioOnce you have installed the Intelli-studio on your PC, the Intelli-studio starts automatically when a camera is connected with your PC. If the Intelli-studio does not start after you have connected the camera to your PC, double-click the Intelli-studio icon on your Windows desktop. The Intelli-studio allows you to play back and edit files. You can also upload files to websites, such as Flickr or YouTube. For details, select [Menu à Help] in the program.
092Transferring les to your computer (for Windows)Icon Description1 Open menus2 Display files in the selected folder3 Change to the Photo edit mode4 Change to the Video edit mode5Change to the Sharing mode (You can send files by emailor upload files to websites, such as Flickr or YouTube.)6 Enlarge or reduce the thumbnails in the list7 Select a file type8 View files of the selected folder on your computer9 Show or hide files of the connected camera10 View files of the selected folder on the camera11 View files as thumbnails, in Smart Album, or on a map12 Browse folders in the connected device13 Browse folders in your computer14 Move to the previous or next folder15Print files, view files on a map, store files in My Folder, orregister facesFor Mac usersWhen you connect the camera to a Macintosh computer, the computer will recognize the device automatically. You can transfer files directly from the camera to the computer without installing any programs. MAC OS 10.3 or later is supported.Transferring les to your computer (for Mac)1. Connect your camera to a Macintosh computer with the USB cable.å You must plug the end of the cable with the indicator light (▲) into your camera. If the cable is reversed, it may damage your les. The manufacturer is not responsible for any loss of data.
0932. Turn on the camera.- The computer recognizes the camera automatically and a removable disk icon will be displayed.3. Double-click the removable disk icon.4. Transfer photos or videos to the computer.Transferring les to your computer (for Mac)
094FAQPlease check the following if the USB connection malfunctions.Case 6 When I open the Device Manager (by clicking Start (Settings) Control Panel (Performance and Maintenance) System (Hardware) Device Manager), there are Unknown Devices or Other Devices entries with a yellow question mark(?) beside them or devices with an exclamation mark(!) beside them. Ã Right-click on the entry with the question(?) or exclamation (!) mark and select "Remove". Restart the PC and connect the camera again. Case 7 In some security programs (Norton Anti Virus, V3, etc.), the computer may not recognize the camera as a removable disk. Ã Stop the security programs and connect the camera to the computer. Refer to the security program instructions about how to temporarily disable the program.Case 8 The camera is connected to the USB port located on the front of the computer. Ã When the camera is connected to the USB port located on the front of the computer, the computer may not recognize the camera. Connect the camera to the USB port located on the back of the computer.Case 1 USB cable is not connected or it is not the supplied USB cable. Ã Connect the supplied USB cable. Case 2 The camera is not recognized by your PC. Sometimes, the camera may appear under [Unknown Devices] in Device Manager. Ã Turn off the camera, remove the USB cable, plug in the USB cable again, and then turn on the camera.Case 3 There is an unexpected error during file transfer. Ã Turn the camera power off and on again. Transfer the file again.Case 4 When using the USB hub. Ã There may be a problem in connecting the camera to the PC through the USB hub if the PC and the hub are not compatible. Wherever possible, connect the camera to the PC directly.Case 5 Are other USB cables connected to the PC? Ã The camera may malfunction when it is connected to the PC at the same time as another USB cable. In this case, disconnect the other USB cable, and connect only one USB cable to the camera.
095FAQÊ When the DirectX 9.0c or later is not installedà Install the DirectX 9.0c or later 1) Insert the CD provided with the camera 2) Run the windows explorer and select the [CD-ROM drive:\\ DirectX] folder and click the DXSETUP.exe file. The DirectX will be installed. Visit the Microsoft website for downloading the DirectX.Ê If a PC connected with the camera stops responding while Windows is starting. à In this case, disconnect the PC and the camera and Windows will start. If the problem happens continuously, set the Legacy USB Support to disable and re-start the PC. The Legacy USB Support is in the BIOS setup menu. (The BIOS setup menu differs from the PC manufacturers and some BIOS menus don’t have Legacy USB Support) If you can’t change the menu by yourself, contact to the PC manufacturer or BIOS manufacturer. Correct disposal of batteries in this productCorrect disposal of batteries in this product (Applicable in the European Union and other European countries with separate battery return systems.)This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other house-hold waste at the end of their working life. Where marked, the chemi-cal symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66. If batteries are not properly disposed of, these substances can cause harm to human health or the environment. To protect natural resources and to promote material reuse, please separate batteries from other types of waste and recycle them through your local, free battery return system.The rechargeable battery incorporated in this product is not user replaceable. For information on its replacement, please contact your service provider.
096Correct Disposal of This ProductCorrect Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems)This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take these items for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal.Samsung Eco-markIt is Samsung’s own symbol mark is used to effectively communicate Samsung’s environmental friendly prod-uct activities to the consumers. The mark represents Samsung’s continuous effort on development of envi-ronmental conscious products.This Class [B] digital apparatus complies with Canadian ICES-003.
